teenyreef Posted October 9, 2018 Share Posted October 9, 2018 5 hours ago, jbb_00 said: You guys want me to do it again this year ? Oh yaaaaasssss 😃 1 Quote Link to comment
jbb Posted October 9, 2018 Share Posted October 9, 2018 🤔 , I can make this happen 1 hour ago, teenyreef said: Oh yaaaaasssss 😃 1 Quote Link to comment
teenyreef Posted October 10, 2018 Share Posted October 10, 2018 3 hours ago, jbb_00 said: 🤔 , I can make this happen Quote Link to comment
Tamberav Posted October 10, 2018 Share Posted October 10, 2018 14 hours ago, jbb_00 said: You guys want me to do it again this year ? Hell ya... I did it twice in the past and plan on participating again if we do it this year. Quote Link to comment
dcknipe Posted October 11, 2018 Share Posted October 11, 2018 My fellow IM10'ers. Where do you find the most efficient place to put your powerhead is? I currently have mine under my Spinstream pointed down shooting across my back wall towards my overflow Quote Link to comment
banasophia Posted October 11, 2018 Share Posted October 11, 2018 3 hours ago, dcknipe said: My fellow IM10'ers. Where do you find the most efficient place to put your powerhead is? I currently have mine under my Spinstream pointed down shooting across my back wall towards my overflow No powerhead in mine, just an upgraded sicce 1.0 pump. Quote Link to comment
smiley28 Posted October 11, 2018 Share Posted October 11, 2018 20 hours ago, dcknipe said: My fellow IM10'ers. Where do you find the most efficient place to put your powerhead is? I currently have mine under my Spinstream pointed down shooting across my back wall towards my overflow This is exactly what mine is doing, shooting right behind the rock and sweeping most detritus to the front.. I think. Quote Link to comment
Porkpie5000 Posted October 11, 2018 Share Posted October 11, 2018 22 hours ago, dcknipe said: My fellow IM10'ers. Where do you find the most efficient place to put your powerhead is? I currently have mine under my Spinstream pointed down shooting across my back wall towards my overflow Mine is there but pointing more upwards towards the surface. Quote Link to comment
dcknipe Posted October 11, 2018 Share Posted October 11, 2018 Well seems like we all have the general idea lol. The dead zone against my back wall was frustrating so I'm glad I'm not the only one Quote Link to comment
smiley28 Posted October 16, 2018 Share Posted October 16, 2018 has anyone else had high temp trouble with the 10g? Mine won’t drop below 80 regardless of surrounding room temperature. Quote Link to comment
Tamberav Posted October 16, 2018 Share Posted October 16, 2018 7 minutes ago, smiley28 said: has anyone else had high temp trouble with the 10g? Mine won’t drop below 80 regardless of surrounding room temperature. No issue with mine... I need to run a heater or it gets very cold! What lights and pumps do you use? Quote Link to comment
Porkpie5000 Posted October 16, 2018 Share Posted October 16, 2018 30 minutes ago, smiley28 said: has anyone else had high temp trouble with the 10g? Mine won’t drop below 80 regardless of surrounding room temperature. Mine doesn't have temp problems at all. I do have a fan on it but it almost never runs. Quote Link to comment
banasophia Posted October 16, 2018 Share Posted October 16, 2018 33 minutes ago, smiley28 said: has anyone else had high temp trouble with the 10g? Mine won’t drop below 80 regardless of surrounding room temperature. No temp issues here. Do you have a lid on yours? Quote Link to comment
LogicalReefs Posted October 16, 2018 Share Posted October 16, 2018 1 hour ago, smiley28 said: has anyone else had high temp trouble with the 10g? Mine won’t drop below 80 regardless of surrounding room temperature. Do you have preset heater? If you can set the temp maybe it’s not calibrated right and you need to lower it. What lights and pump are you using? Might be throwing too much heat in the tank. Quote Link to comment
smiley28 Posted October 17, 2018 Share Posted October 17, 2018 Using a hydra 26hd 13 inches off the water and a .5 syncra silent. My heater is a 75w neotherm which is overkill but I have pulled it out for several hours with a steady 80 reading from a inkbird thermometer. I have heard of a ton of people running the .5 syncra so I don’t think it’s the syncra but the heat coming off the hydra seems minimal. I have the hydra dialed so low there is barely any warmth inches from the light. Quote Link to comment
smiley28 Posted October 17, 2018 Share Posted October 17, 2018 Also running a aqamai pump at 15-30%. I wouldn’t think those 3 major sources would be enough to heat the tank like that. Quote Link to comment
LogicalReefs Posted October 18, 2018 Share Posted October 18, 2018 1 hour ago, smiley28 said: Also running a aqamai pump at 15-30%. I wouldn’t think those 3 major sources would be enough to heat the tank like that. Try lowering the temp on the heater 4 degrees no matter what you have it set at. See if the temp goes down. 1 Quote Link to comment
banasophia Posted October 18, 2018 Share Posted October 18, 2018 On 10/16/2018 at 11:27 AM, smiley28 said: has anyone else had high temp trouble with the 10g? Mine won’t drop below 80 regardless of surrounding room temperature. Agree with @LogicalReefs to turn down the heater. What are you using for a lid, is it the stock mesh lid? What temp does the room usually run? Are you sure your thermometer is correct? Could the pump be overheating due to needing maintenance? IMO, the most important first question is your lid. If you are using the stock lid, you’re good and that’s not the problem, but if it’s something else that would be my primary focus. Quote Link to comment
smiley28 Posted October 18, 2018 Share Posted October 18, 2018 I’ve left the heater out and with a generic 2$ thermometer got the same reading. I swap the return every month for the last 2 months cause I got a backup for that purpose so the pump is clean. Aqamai is a little dirty due to attempting to let coralline grow. I did drop the heater temp to let it sit a few days but it’s still steady at 79.8. I’ll check it in the am before clinical tomorrow. I’ve been forgetting to check before I leave and lights are off. Quote Link to comment
kawbd_08 Posted October 19, 2018 Share Posted October 19, 2018 On 10/16/2018 at 12:27 PM, smiley28 said: has anyone else had high temp trouble with the 10g? Mine won’t drop below 80 regardless of surrounding room temperature. I used to have the problem. I think the stock pump increase temp. I end up using a inkbird temp controller with fan and heater connected to it. My fan turn on often. Quote Link to comment
Wherrey Posted October 21, 2018 Share Posted October 21, 2018 On 10/16/2018 at 12:27 PM, smiley28 said: has anyone else had high temp trouble with the 10g? Mine won’t drop below 80 regardless of surrounding room temperature. I noticed this same thing when I added a koralia nano powerhead my temp went up I took it out and it went back down. I ordered a sicce pump and the spin stream so we’ll see how that goes Quote Link to comment
Wherrey Posted October 21, 2018 Share Posted October 21, 2018 Glad to join the Nuvo 10 club! I just recently got into the saltwater hobby about 3 months ago I do have a 55 gallon FOWLR at the moment and just recently picked up a Nuvo 10 from my LFS he gave me a pretty sweet deal and it was up and running with him for about a year and a half. Transferred real smooth to my home with no issues. All parameters checked clear after the move and letting it settle. I’ve been following multiple threads here and it’s great to see there are a lot of people willing to help out and give advice. I did my first 2 gallon water change and plan on doing the 2 gallons weekly. This is is when I first got it home 10/13/18 10/18/18 Equipment: IM NUVO Fusion 10 IM Custom Caddy Stock Pump Wave Point Blade HO LED 50 watt Aqueon Heater Filtration: 10 lbs Sand LFS gave me 9 lbs Reef Saver Rock 3 Marine Pure spheres Chemipure Blue Purigen Livestock: 2 Frostbite Clowns 1 Astrea Snails 1 Turbo Snail 1 Red Legged Hermit 2 Brittle starfish (came in tank) Current Corals: Torch 2 Quote Link to comment
Guat93 Posted October 22, 2018 Share Posted October 22, 2018 On 4/4/2015 at 10:22 PM, reefernanoman said: Honestly if I put even the stock pump at full blast, it will overwhelm my intank media basket, so I just use it at half the slider setting and it works great like that. For extra flow and no heat transfer, I went with an MP10 like I mentioned before. Hello, I am a new guy in the hobby. I got my self a Nuvo Fusion 10 and I recently found out that the stock return pump has an adjustable flow. I would thank you so much if you explained how to adjust the flow on this pump because I feel that the flow rate that is has right now is the minimum. Quote Link to comment
Wherrey Posted October 23, 2018 Share Posted October 23, 2018 Need help IDing these would they be a war coral and Favia? Quote Link to comment
CinnamonTorch Posted October 23, 2018 Share Posted October 23, 2018 Hey guys!! I got you all a little present! Enjoy and dont forget to follow on instagram!! 🙂 enjoy 🙏🏼♥️ Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.