waldoz Posted March 6, 2022 Author Share Posted March 6, 2022 Yeah he is in the tank already. Going to move the 🌈 BTA after dinner. Almost done making water. Will have to do the dip athon tomorrow. Son told me last night we were out and been filling all day. Almost all going on sand bed. Still waiting for the par meter. I have few sticks that are barely hanging on in the 20l. FS opening back up. 2 1 Quote Link to comment
waldoz Posted March 6, 2022 Author Share Posted March 6, 2022 Yeah got all three in there. The two other are size of a blue berry. Can't find them. The other one went all the way into a hole at the bottom. Took us quite a while to find him. Hope he comes out sooner than later. 1 Quote Link to comment
waldoz Posted March 6, 2022 Author Share Posted March 6, 2022 Getting ready. Dollar 25 store run to stock up. The real goods and their day is done! Mixing 4 gallons and waiting. Going to do them in batches. This might be more than one day. Bit of fragging. I am following almost all of this article. Reef builders article. Good stuff! There should not be anything going into the tank and start with clean slate.😁 3 Quote Link to comment
waldoz Posted March 7, 2022 Author Share Posted March 7, 2022 Yeah tomorrow.🙄 But I have a new frag shelf I was able to put one of the cleaner magnets in.😁 It barely fit in there. Should be done by 5am lol. Going to put the sticks and other hard Coral. 1 Quote Link to comment
waldoz Posted March 7, 2022 Author Share Posted March 7, 2022 All finished. Don't know if I will just glue the frags or drill holes. There is another one I might try. I have an old flipper that I might use on the next one that was given to me. 1 Quote Link to comment
waldoz Posted March 8, 2022 Author Share Posted March 8, 2022 Got the shelf in, but ran out of time. Will prob get some things on there later in the week. Toad stool is pissed. He was stuck to a cement plug and I smashed it to remove any pest. Ducans are opening up pretty good only been about an hour. Same with the frogspawn it's doing well after all the treatments. There were a ton of bristle worms on them. My Hammer is coming back pretty good. It looked pretty beat up though. The Acans I split one pulling it off the plug. It's got stingers out and he definitely pissed. Might have to move him tomorrow. Full tank shot. It looks so much better than it did. I think it will be easier with the others as I am going to do small trays for dipping the next time. Trying to figure out where to put the rest. Still waiting on the par meter. 4 Quote Link to comment
waldoz Posted March 22, 2022 Author Share Posted March 22, 2022 Finally tank move finished! Few pics of few of my favorite lps. Hammer is doing great. 👍 I had moved him some so not totally open. Acans need to feed these guys. Duncans are all nice and fluffy. Going to stop posting on the other tank thread. It's only being used to feed the CUC for now. Getting little algae but not enough to feed the cuc yet. Don't want them to starve I think maybe another week and will chuck them in. Want to shut down that tank. Anyone have suggestions when to add the cuc? 4 Quote Link to comment
NoOneLikesADryTang Posted March 22, 2022 Share Posted March 22, 2022 That purple and green tipped hammer is so nice! 2 Quote Link to comment
waldoz Posted March 22, 2022 Author Share Posted March 22, 2022 You should have seen the group it came out of. I was lucky the local shop broke one off for me. They charged me for one head but I got two 😁 I on the hunt for another color variation. 2 Quote Link to comment
waldoz Posted March 27, 2022 Author Share Posted March 27, 2022 Looks like the creamscicle chalace is finally looking better. I don't think I am a fan and might end up trading this guy off Though. Micro frag of frogspawn lol Found this guy on the sand bed. 3 2 Quote Link to comment
waldoz Posted April 9, 2022 Author Share Posted April 9, 2022 This is about all the hydra 26 can do. Here are the par numbers though might have to rethink placement of a few and might have to get rid of one or two. The shelf in the back is at 60 so going to have to move those guys to the middle. I have the acclimation set up for 3 weeks. The par numbers listed are what they will be after 3 weeks. Probably only going to move sticks around and few other things. If you guys have any suggestions post up. 2 Quote Link to comment
waldoz Posted April 16, 2022 Author Share Posted April 16, 2022 Moved a few things around a bit. Went down to CFC finished off my Christmas present and picked up this guy. I think it's called Splatter Hammer. I love the colors and they are supposed to change as it grows. I think it's time to move this guy along. All for now. 2 Quote Link to comment
debbeach13 Posted April 16, 2022 Share Posted April 16, 2022 8 hours ago, waldoz said: I think it's called Splatter Hammer. I love the colors and they are supposed to change as it grows. I love this coral and I got one a few weeks ago. My lighting isn't the greatest so mine might not do much. I will be interested in how yours does. Quote Link to comment
waldoz Posted April 16, 2022 Author Share Posted April 16, 2022 Yeah, the only thing I am concerned about right now is it's not fully open and same with my other hammer. Though in the store there was very little flow when I picked it out. Quote Link to comment
waldoz Posted April 27, 2022 Author Share Posted April 27, 2022 Took few crappy pics. I threw the sticks away, tired of waiting for them. The RBTA has finally moved to the top. Going to start really feeding him and get him big. Want to put some clowns in. The Acan is doing really well in the corner. Mushroom is coloring up well too. All for now and nobody wants my chalice for trade.🙄 3 Quote Link to comment
waldoz Posted July 1, 2022 Author Share Posted July 1, 2022 Got some ugly stuff growing. It's weird that it is going only growing in the shaded areas. Going to do water change and suck the sand up. I have some treatment for it but don't want to do that just yet. Any suggestions? Quote Link to comment
PeterU Posted July 1, 2022 Share Posted July 1, 2022 Increase your water flow to that area. Quote Link to comment
waldoz Posted July 7, 2022 Author Share Posted July 7, 2022 I had picked this crappy power head on Amazon for $6. I don't like it but it will have to do. For now. The mp10 bit the dust, have not been able to use it for quite a while. I picked it up locally pretty cheap. Top center section blew up. Shaft cracked and broke. The root of the problem, magnet separation. I will probably get a new power head. The controller seems to still work fine. People don't seem to have problems with the mp40s but those are out of my price point. 😁 There seem to be a lot of new power heads so might have to look for different options. Quote Link to comment
schgr.cube Posted July 7, 2022 Share Posted July 7, 2022 I have a MP10 wet side that I somehow acquired that might work, I can take a look at it in a little bit and if it seems okay I can send it to you if you just pay shipping. 1 Quote Link to comment
waldoz Posted July 7, 2022 Author Share Posted July 7, 2022 👍 Pm with details for payment. Thank you! Quote Link to comment
schgr.cube Posted July 7, 2022 Share Posted July 7, 2022 11 minutes ago, waldoz said: 👍 Pm with details for payment. Thank you! NP! PM'd you info and photos. Quote Link to comment
waldoz Posted July 25, 2022 Author Share Posted July 25, 2022 Whelp tried the westside powered it up spun off and broke. I will have to probably just buy a new one. Thanks @schg for trying appreciate the effort.👍 So we ended up doing Sea chem routine. Put a 3d printed air stone next to the $5.99 power head. It worked pretty good. Ran that for 48hrs and did 20% Water change. Everything is doing fine and everything is gone. One thing don't run your skimmer. I couldn't get it to skimm, it would just blow up. Probably do another water change and try again. I was having algae problems in the over flow. I modeled a cover. Had to do it in two parts, it was to big. I don't know if I like it as it over hangs. I think It will do the job for now. That's about it for now. I think we are going to try a new salt mix this next round see how it goes. We are currently using instant ocean. Have not had any problems. Thinking switching to Instant Ocean reef crystals. For some reason it's cheaper than the standard stuff. Never used it anyone have any input? 1 Quote Link to comment
waldoz Posted July 30, 2022 Author Share Posted July 30, 2022 Got some Coraline going on. 😁👍 It's taken a while to get this going. I scraped some off a frag plug few months ago. Glad it finally going. 1 Quote Link to comment
waldoz Posted August 5, 2022 Author Share Posted August 5, 2022 Took some pics. 🙄 We are thinking another fish is next for the tank. Not really sure which way to go with that. Got plenty of room any suggestions? 3 Quote Link to comment
schgr.cube Posted August 5, 2022 Share Posted August 5, 2022 On 7/24/2022 at 11:51 PM, waldoz said: Whelp tried the westside powered it up spun off and broke. I will have to probably just buy a new one. Thanks @schg for trying appreciate the effort.👍 Ugh damn, I'm sorry the wetside didn't work out for you, I was afraid that might happen. 😣 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.