Tigahboy Posted March 19, 2019 Share Posted March 19, 2019 That rainbow chalice is sick! Really looking forward to seeing what it looks like when it grows up into an adult rainbow chalice. Quote Link to comment
VaporCountry Posted March 20, 2019 Author Share Posted March 20, 2019 1 hour ago, DreC80 said: Very nice. The doser is definitely going to come in handy once everything starts growing. Any idea what two part you are going to use? Yea I can't wait to get it set up. Right now I'm manually dosing 5.5ml of ESV Bionic every 2 days. I will probably stick with the ESV for the doser as well, still have about 300ml left. After that I may switch the ALK part to soda ash from BRS. Someone suggested it because it gives you more of a PH boost. Quote Link to comment
VaporCountry Posted March 20, 2019 Author Share Posted March 20, 2019 1 hour ago, Tigahboy said: That rainbow chalice is sick! Really looking forward to seeing what it looks like when it grows up into an adult rainbow chalice. Thanks! When they are grown they look so much better then these booger frags lol, apparently that one is suppose to be one of the better growers though. Here are my other two 😝 1 Quote Link to comment
VaporCountry Posted March 20, 2019 Author Share Posted March 20, 2019 Here are some colony shots that the two rainbow frags above came from Quote Link to comment
Tigahboy Posted March 20, 2019 Share Posted March 20, 2019 1 hour ago, VaporCountry said: Here are some colony shots that the two rainbow frags above came from 😮 Beautiful! 1 Quote Link to comment
Butchy21 Posted March 20, 2019 Share Posted March 20, 2019 1 hour ago, VaporCountry said: Here are some colony shots that the two rainbow frags above came from Do most of the chalice types encrust or form more of a plate shape? I’ve only had a Hollywood stunner and it always grew upward, forming a plate/bowl shape. i just got a pink eyed chalice and I’m trying to decide the best placement for it to ensure ample room for growth and playing nice with others. Quote Link to comment
VaporCountry Posted March 20, 2019 Author Share Posted March 20, 2019 1 hour ago, Butchy21 said: Do most of the chalice types encrust or form more of a plate shape? I’ve only had a Hollywood stunner and it always grew upward, forming a plate/bowl shape. i just got a pink eyed chalice and I’m trying to decide the best placement for it to ensure ample room for growth and playing nice with others. Im not really sure to be honest. I think it depends on the type of chalice and how it grows. Most of the chalices I have tend to encrust though. I would just google some images and see if you can find a larger colony of the chalice you have and see how it is growing. 1 Quote Link to comment
VaporCountry Posted March 21, 2019 Author Share Posted March 21, 2019 Got the 1Link cable in today for the Neptune DOS and Installed everything in my stand. Was a little tricky trying to get all the air bubbles out but finally got it figured out, calibrated and programed. I want to keep my ALK at 9 but am using RedSea Coral Pro salt for water changes. Programed it to dose ALK at night and CAL during the day. I also programed the DOS to turn off on Saturday(the day I do the water change) so the bump in ALK will almost even out. Once this salt bucket is gone I'm going to switch to Fritz and match my ALK to the salt level. Has anyone used Fritz RPM salt? If so how do you like it? My back compartment with dosing lines and probes, using Vertex holders Quote Link to comment
A Little Blue Posted March 21, 2019 Share Posted March 21, 2019 Nicely done. Those chalices......... top shelf stuff. 👍 1 Quote Link to comment
VaporCountry Posted March 22, 2019 Author Share Posted March 22, 2019 Got a couple bottles of Pink Fusion coralline algae in a bottle by ArcReef. Interested in seeing the results. I all ready have a little bit of purple coralline growing growing on the back wall so figured id try the pink. Has anyone used the Pink Fusion or Purple Helix? Quote Link to comment
VaporCountry Posted April 2, 2019 Author Share Posted April 2, 2019 A little update So my sixline wrasse has devolved popeye in one of his eyes about a week and a half ago. It is bulged out and cloudy. I googled it and they say it can come from a bacterial infection or an injury. I am leaning towards an injury, not sure if he just ran into a rock or he got attacked by my Midas blenny. The blenny likes to chase him rarely. I don't have a quarantine set up to treat for the bacterial infection so im just going to let him ride it out and hope he recovers. He is acting perfectly healthy but the eye is just bulging. I have been having problems with my Nitrate and Phosphate. Both were reading zero and I couldn't get them up with overfeeding. I decided to cut my fuge light to 6 hours from 12. When I did this I only got a raise in phosphate. So then I cut it to 2 hours and just got a further raise in phosphate, algae is starting to grow. I am at a loss and think I am just going to go back to 12 hours and dose nitrates. I do have a ridicules amount of marine pure spheres in the back. Do you think its worth removing some? The pink coralline algae hasn't done anything yet but im seeing a ton of purple starting to spot on all the rocks Quote Link to comment
DreC80 Posted April 4, 2019 Share Posted April 4, 2019 I would pull out some of the marine pure. Between a fuge and marine pure, the tank being relatively new, you may be exporting too much. A mostly lps tank should be able to handle some nitrates and phosphates. Just be careful if your phosphates are going up and your nitrate is truly zero. From my understanding that is when dinos can creep in....ie when phosphates are greater than nitrates. Nitrate dosing could work, but I would just eliminate some of the export measures as opposed to dosing nitrates. At some point the tank will stabilize. When I first started my tank I was over skimming, running too much carbon and gfo and nearly lost some corals because of it. Now I don't run gfo, add a little carbon and dry skim. Everything is doing much better. 1 Quote Link to comment
VaporCountry Posted April 5, 2019 Author Share Posted April 5, 2019 On 4/3/2019 at 8:15 PM, DreC80 said: I would pull out some of the marine pure. Between a fuge and marine pure, the tank being relatively new, you may be exporting too much. A mostly lps tank should be able to handle some nitrates and phosphates. Just be careful if your phosphates are going up and your nitrate is truly zero. From my understanding that is when dinos can creep in....ie when phosphates are greater than nitrates. Nitrate dosing could work, but I would just eliminate some of the export measures as opposed to dosing nitrates. At some point the tank will stabilize. When I first started my tank I was over skimming, running too much carbon and gfo and nearly lost some corals because of it. Now I don't run gfo, add a little carbon and dry skim. Everything is doing much better. Thanks for the advice. Defiantly don't want dinos, I set the fuge back to 12 hours so that should take the phosphates back down. Any hard in having nitrates but 0 phosphates? I did order the nitrates to dose but maybe ill wait a bit like you said. I'll try to remove 1/3 of the marine pure and see what happens. Also I have been skimming pretty wet, think I will tune it to run a little dryer. Quote Link to comment
DreC80 Posted April 5, 2019 Share Posted April 5, 2019 The end goal should be for your nitrates to be around 3-5 ppm and have some phosphate. My tank has seemed to settle in around 7 ppm nitrate and .03/.04 phosphate and it's all SPS. You also don't want your phosphates to be truly zero. Corals use phosphate, so if you notice any pailing or die off, double check your phosphates to make sure they aren't zero. If your phosphates remain at zero for a significant period of time, your corals will starve. If you are like me, you put all kinds of measures in place when you started the tank to make sure you didn't get nuisance algae. The problem is between skimming, fuges, marine pure, gfo, carbon, filter floss, water changes and all of the other export options that are available, we tend to over do it and strip the tank and the corals suffer. Maybe not immediately, but they do. Trying to find the import/export balance is tricky, but once you do it's great. Your tank is awesome by the way. Looking forward to seeing it fill in. 1 Quote Link to comment
VaporCountry Posted April 14, 2019 Author Share Posted April 14, 2019 Not a whole lot to report. My sixline wrasse's eye is looking 10x better and is pretty much healed. Still trying to figure out my nutrient balance. I am having a hard time but ill eventually figure it out. Went to a local frag swap today and picked up a new sps frag. Hopefully it will do well, only have one other sps. The central air conditioner went out and the house has gotten hot being in North Carolina. My tank got up to 82 degrees. While I know that's fine I wanted to air on the side of caution and get a fan. I found one at walmart that mounts to the wall. I really like the looks of it and it had no problem lowering the tank a few degrees. I have the fan hooked up to my apex so it automatically kicks on when it gets too hot. ORA Red Planet Quote Link to comment
DreC80 Posted April 15, 2019 Share Posted April 15, 2019 I love red planets. From everything I've read and experience with mine they can tolerate high light levels. If in high light they will be all red with pinkish tips. If under a bit lower lighting they will develop a green base. Keep that alk stable and you should be good to go. 1 Quote Link to comment
VaporCountry Posted April 15, 2019 Author Share Posted April 15, 2019 1 hour ago, DreC80 said: I love red planets. From everything I've read and experience with mine they can tolerate high light levels. If in high light they will be all red with pinkish tips. If under a bit lower lighting they will develop a green base. Keep that alk stable and you should be good to go. Thanks for the tips. My lighting is pretty low for all the LPS, guess we will see if I get the green base. If this goes well I can see myself getting addicted to SPS lol Quote Link to comment
VaporCountry Posted April 21, 2019 Author Share Posted April 21, 2019 Everything is going well, I finally have got some nitrate and phosphate readings. I think I have found a balance. I cut my fuge to 6 hours and have been dosing NeoNitro by Brightwell. I hope I get the nitrates to stabilize and won't have to continue dosing. Also picked up a bunch of acro frags from a local hobbyist. Sorry for the crappy pic. Quote Link to comment
DreC80 Posted April 21, 2019 Share Posted April 21, 2019 What acros did you end up getting? You'll definitely need to keep a close eye on alkalinity and calcium once those start growing. Quote Link to comment
VaporCountry Posted April 21, 2019 Author Share Posted April 21, 2019 57 minutes ago, DreC80 said: What acros did you end up getting? You'll definitely need to keep a close eye on alkalinity and calcium once those start growing. Not really sure lol. The guy I got them from didn't know any of the names. A few of them are colorful and others need to color up. AlK and Cal stop dropping quick huh? I guess ill test every two days and see how it goes. Really glad I got the Neptune DOS. Quote Link to comment
VaporCountry Posted April 21, 2019 Author Share Posted April 21, 2019 1 hour ago, DreC80 said: What acros did you end up getting? You'll definitely need to keep a close eye on alkalinity and calcium once those start growing. Here are a few more pics. Not really that much better though. Pretty sure they are all acropora I'm a noob with SPS. Quote Link to comment
DreC80 Posted April 21, 2019 Share Posted April 21, 2019 10 hours ago, VaporCountry said: Here are a few more pics. Not really that much better though. Pretty sure they are all acropora I'm a noob with SPS. Very cool, SPS are addicting in my opinion. The DOS will definitely help keep levels stable. I find that my tank's alk and calcium usage fluctuates, which requires me to test calcium about once a week and alkalinity every couple of days. I hope they all do well for you. 1 Quote Link to comment
VaporCountry Posted June 20, 2019 Author Share Posted June 20, 2019 Haven't updated in awhile so this is going to be a long post with a lot of pictures. If you don't feel like reading just skip to the eye candy 😂 Well where do I start, a little after I updated about my temperature getting high due to the air conditioning out, I started having some corals recede a bit. Around this time I also started dosing Nitrate so I'm not sure which caused it. Also out of nowhere I had what appeared to me to be Dinos.I did some research and it appeared some people had luck with UV. I ordered the IM Aqua shield UV and this seemed to clear up 95% of it. Everything is going ok then I started to see some hair and bubble algae. I looked in my fuge and the cheato had died. I don't know if it was from me trying to cut back the photoperiod to bring up nitrites up or maybe the UV caused it to die. So im like how am I going to deal with this. After reading about vibrant and throughly reading through a lot of the big vibrant thread on Reef2Reef I decided to give it a shot. Within a few weeks the algae was gone. I did notice a few negative effects but nothing I couldn't live with. 1st was my ALK consumption went down so my corals weren't growing as fast. 2nd a few of my corals lost some color. 3rd my phosphate went from .05 to .2 At this point I have not dosed vibrant for a few weeks but am starting to see some hair algae return. I am going to start dosing it again weekly instead of biweekly to try to deal with it. Im also going to work on bringing my Po4 down again. Oh almost forgot I lost my Midas blenny. I got back from attending a coral show and was dead tried from driving. Got back home, got all the corals dipped and put in the tank but forgot to put the screen top back on. Woke up the next morning to find the poor guy dried up on the floor. Since I was dealing with some algae problems I just replaced him with a lawnmower blenny. I think I've hit on all the major points. Now to the fun stuff. I have decided to get into collecting and propagating zoas. I set back up my little 10g nuvo as a frag tank again. Its still pretty new but its cycled and I have some tester frags in it. I will try to keep that build thread updated. Quote Link to comment
VaporCountry Posted July 14, 2019 Author Share Posted July 14, 2019 Things are going well. I have been getting really good growth on my LPS lately. Think the tank is starting to get a little more mature and stable which is helping. I had a little hard time with po4. It would raise and then I would dose phosphate E, then it would just rise again in a never ending cycle. I just decided to run some GFO and that seems to be working. Some of my zoas aren't doing so hot and aren't opening while others are fine. Don't know what the deal is. Tried a couple different dips and it doesn't seem to be helping. Im going to order some Furan 2 and give that a shot and of course its the high end ones not doing well 😡. I got some new frags so that always cheers me up lol FTS New Frags Quote Link to comment
VaporCountry Posted September 25, 2019 Author Share Posted September 25, 2019 Haven't really been on this forum as much as some other ones but thought id post a current FTS(don't mind the bottle, I was trying to catch a sixline and it worked yay!!!) 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.