Sherman Posted June 26, 2016 Author Share Posted June 26, 2016 I leave message on the LED Group Buy website 's leave a message button 2 days ago. No reply so far I email them at info@ledgroupbuy.com Also no feedback. Am I communicating with them in the right way? Link to comment
jedimasterben Posted June 26, 2016 Share Posted June 26, 2016 I leave message on the LED Group Buy website 's leave a message button 2 days ago. No reply so far I email them at info@ledgroupbuy.com Also no feedback. Am I communicating with them in the right way? That does go to a shared inbox (that Milad is usually pretty quick at getting back to), but the 'proper' way is using the contact link on the website, this puts in a help ticket through LEDgroupbuy's Zendesk system so it's easier to keep track of on their end. Link to comment
Sherman Posted June 26, 2016 Author Share Posted June 26, 2016 Since I wrote in both I think wait another few days see any feedbck Link to comment
Sherman Posted June 26, 2016 Author Share Posted June 26, 2016 Finally get a response from today morning Leave a message. <Your request (#4687) has been received and is being reviewed by our support staff. To add additional comments, reply to this email> Link to comment
Sherman Posted June 28, 2016 Author Share Posted June 28, 2016 Need help on the order. Hope someone can help 1.If i using 10 LDD drivers how many board I need. Look like LEDGroup Buy do not has O2Surplus LDD driver board. 2. For Bluefish mini controller how many mini ribbon cable I need per LDD driver board? 3. Where can I get the lime led from? Seems like LEDGroup Buy never sell Thank You Link to comment
evilc66 Posted June 28, 2016 Share Posted June 28, 2016 Using the O2Surplus boards isn't a requirement, but the stuff he makes is quite nice. LED Group Buy sells Coralux boards, and for 10 LDDs, you would need a pair of the 5 channel boards. To wire them, you would only need a single Bluefish ribbon cable, and then just run regular wires from the three pwm channels you will be using to the different LDDs that you want to gang together. As for Lime LEDs, Steve's LEDs and RapidLED has them. Link to comment
Sherman Posted June 29, 2016 Author Share Posted June 29, 2016 Thank You evilc66 to the rescue. So I only need one Bluefish ribbon cable. Who is selling O2Surplus boards? For this set of light I will get Coralux boards So only Steve and Rapidled has Lime led. I will order from them in my next order This order I will get what LEDGroupBuy has Thank You Link to comment
evilc66 Posted June 29, 2016 Share Posted June 29, 2016 O2Surplus sells O2Surplus boards He's a member here. Hit him up for his goodies. He has a really nice 6 channel board that has fan control and a spot for a Bluefish Mini. Link to comment
Sherman Posted June 29, 2016 Author Share Posted June 29, 2016 Finally order all the necessary spares. bluefish mini controller, Coralux 5 up LDD driver board heatsink hanging kit from LEDGROUP BUY Link to comment
Sherman Posted June 30, 2016 Author Share Posted June 30, 2016 Hi evilc66, I cannot find O2Surplus under Sponsors Tab. How can go about contacting him Thank You Link to comment
jedimasterben Posted June 30, 2016 Share Posted June 30, 2016 Send him a PM. But you already bought a Coralux 5up LDD board? Link to comment
evilc66 Posted June 30, 2016 Share Posted June 30, 2016 Hi evilc66, I cannot find O2Surplus under Sponsors Tab. How can go about contacting him Thank You He's a member, not a sponsor. Like Jedi said, just PM him directly. Link to comment
Sherman Posted June 30, 2016 Author Share Posted June 30, 2016 Oop I see. Ok I will PM him Buy another different board can try and compare Link to comment
Sherman Posted July 6, 2016 Author Share Posted July 6, 2016 Wow this is my lucky week. Receive my meanwell power supply and LDD drivers Yesterday receive my 2 alumium heat sink Today receive O2 Surplus PM. He seems do not have a website? Anywhere I can see his products? Or is it only LDD driver boards? Now waiting for LEDGroupBuy delivery and the fabricated light casing . LEDGroupBuy normally take how long to deliver. I am in Singapore Thank You Link to comment
Sherman Posted July 8, 2016 Author Share Posted July 8, 2016 Finally receive my order from LEDGroupBuy. Well package and arrive faster then I aspect. Link to comment
Sherman Posted July 9, 2016 Author Share Posted July 9, 2016 Now except for the casing I received all my items i have one question now. Where usually we should locate our mini bluefish controller? Together with the power supply or in the light casing? Link to comment
jedimasterben Posted July 11, 2016 Share Posted July 11, 2016 Doesn't particularly matter, the Imp card just needs to be able to get a signal, and it shouldn't be somewhere that it gets too toasty. Link to comment
Sherman Posted July 11, 2016 Author Share Posted July 11, 2016 Thank You jedi. Is there any place I can find detail on connecting up Bluefish mini LDD controller to the driver board. Especially if more then one driver board Link to comment
Sherman Posted July 15, 2016 Author Share Posted July 15, 2016 Beside the G and 1 to 5 on the coralux driver board connect to bluefish mini G and 1 to 6 respectively. There are 2 more points on the coralux board mark as V. Is it I connect these 2 points to the power supply? On the coralux board which point is positive and which point is negative? Lastly how to connect the 2nd coralux board to the bluefish mini? Is it parallel from the 1st coralux board board input point? Thank You Link to comment
evilc66 Posted July 17, 2016 Share Posted July 17, 2016 V is Vin, as in power supply positive. Connect power supply negative to one of the G ground points. Connecting a second LDD board requires every connection to be run in parallel to the second board (except the LED outputs of course). Link to comment
Sherman Posted July 18, 2016 Author Share Posted July 18, 2016 From the back of the coralux driver board on the Input side I see(Solder side) VSS VSS GND GND GND 5 4 3 2 1 Which VSS is +? Right (next to GND)or Left? Or both also is V+ I connect Power Supply V+ to any of the VSS and Power Supply V- to Coralux board GND Link to comment
Sherman Posted July 19, 2016 Author Share Posted July 19, 2016 Thank You evilc66. So both VSS is V+ Thank You Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.