Roshan8768 Posted September 19, 2013 Share Posted September 19, 2013 That looks good! If anything, I would angle the left island a little bit, so that the right end is either pointing more towards the back wall, or towards the front. It'll probably help add depth vs. the wall with a hole in it look if both islands line up perfectly Link to comment
HiImSean Posted September 19, 2013 Author Share Posted September 19, 2013 Thanks, it's at a little bit of an angle but I'll see how a more of an extreme angle looks. Link to comment
HiImSean Posted September 28, 2013 Author Share Posted September 28, 2013 Got some new RODI filters this week, along with my bulkheads and uni-seals from BRS! Went out today and picked up plumbing stuff. I sketched out my layout and did a "mock-up" of the plumbing (haven't cut the PVC yet). I improvised when I got to Lowes since they had true union valves. The only thing I'm thinking of removing after putting it together is the ball valve. The true union valve on the right will lead to a manifold in a little while. What do you guys think? Link to comment
Roshan8768 Posted September 29, 2013 Share Posted September 29, 2013 Don't have a sump so don't really know anything about this. Good that you've planned it out ahead of time, I'm sure someone will chime in and let you know if something isn't right Link to comment
HiImSean Posted September 29, 2013 Author Share Posted September 29, 2013 I've already been told no true union in the drain. I'm really contemplating a Herbie overflow, I'm just not sure. Link to comment
Arkayology Posted September 29, 2013 Share Posted September 29, 2013 I would suggest you put a union right over your pump so you can service it easily without having to take half of the pluming off and then unscrewing it. Just a thought. Link to comment
HiImSean Posted September 30, 2013 Author Share Posted September 30, 2013 Thanks, I'll prolly change it to that. Link to comment
HiImSean Posted October 5, 2013 Author Share Posted October 5, 2013 I was a busy boy this morning. I did decide to go with a Herbie overflow, I hear a lot of stories of people eventually switching over so I figured to it right the first time. Everything fits pretty snug. I have yet to glue it together, figured I'd get some opinions first. The only thing I will be changing is cutting the 3/4" PVC leading to the True Union Valve for the manifold a little shorter. I'm trying to decide if I should face the manifold towards the drain/skimmer or towards the other side of the stand where the empty space is. For now I just plan on having my Apex and ATO over on the right side. Link to comment
HiImSean Posted October 14, 2013 Author Share Posted October 14, 2013 I'm waiting on a gate valve to be delivered to finish everything up. I couldn't find one locally, or out of town for that matter, so now I play the waiting game to glue. I am also upgrading my Apex JR to Apex Lite. It'll allow for more expansion than the JR and I really want to set up multiple float switches in the tank and sump to prevent any overflowing. Link to comment
HiImSean Posted October 23, 2013 Author Share Posted October 23, 2013 Progress for the sake of progress... I ordered a few more things this week (float switches, test kits, wireless adapter for Apex and prazipro) that will be here next week. I bought 400g worth of salt this weekend, should hold me over for a few months. Plugged up my WP25s while doing my leak test and these things create some flow!! Lastly I drilled my rock and got it pieced together! Now the fun [waiting] begins. I think I need to raise the emergency drain a little more to quiet it down a tad more. This was my "workshop" for the past few weeks Link to comment
HiImSean Posted November 2, 2013 Author Share Posted November 2, 2013 The tank is in place and ready for water. I made one screen top yesterday but miss wrote down the amount of frame I need so yet again I need to run to Home Depot. I cleaned my garage out to clear space for a WC station and started making my first batch of RODI water. I picked up a 32g Brute can. I changed my RODI filters out also. Lastly I got my order from amazon with the float switches, prazipro, test kits and wireless adapter. I just need my power adapter for my apex lite, suppose to be here Monday, then I can start programming. I only have 40lbs of sand right now, I'm thinking I might need another bag. I'll add it right before I start adding water to the tank, so most likely tomorrow evening after I mix it up. Link to comment
HiImSean Posted November 11, 2013 Author Share Posted November 11, 2013 Well I got my tank completely filled this weekend. Everything was looking great, but I noticed a small leak from the threads in the bulkhead adapter. I unscrewed it and now I have a broken bulkhead. I'm guessing I screwed the adapter in too much. The best part is that I'm traveling all week this week, won't be back till Friday. So Saturday I'll be hunting down some slip x thread bulkheads, yay!! Link to comment
HiImSean Posted November 25, 2013 Author Share Posted November 25, 2013 I've done a few tests on the tank, been traveling the last two weeks so that makes things hard. 11/20- NO2=0.1 NO3=2-5 NH3/NH4=0 temp=81 sg=1.026 11/25- NO2=0.1 NO3=5-10 NH3/NH4=0 temp=79 sg=1.026 Seems like the cycle is coming to a close soon. I haven't had any diatoms on the rock that I can tell, I'm not running any lights now. In the mean time here's a crappy iPhone pic Link to comment
HiImSean Posted December 2, 2013 Author Share Posted December 2, 2013 Got a decent picture from our Turkey Day setup Link to comment
HiImSean Posted December 6, 2013 Author Share Posted December 6, 2013 Tomorrow will be the big day! Nitrates have been holding steady and everything else at 0. I did a 20g waterchange, about 20% total water volume, last night and I'm preping for the move tomorrow morning. I may move some corals over this evening so tomorrow is just fish and a few other corals. I need to do a peroxide dip/rinse on some zoas that have GHA.What do you guys recommend for the CUC in the current tank? Try and dig out snails or start with a fresh CUC? My melanarus wrasse picks off a lot of smaller snails but I see some nassarius snails every once in a while. I was thinking of doing a smaller package from reefcleaners since they end up sending soooooooo many. Link to comment
HiImSean Posted December 8, 2013 Author Share Posted December 8, 2013 IMG_7628 by slu13913, on Flickr IMG_7600 by slu13913, on Flickr IMG_7577 by slu13913, on Flickr IMG_7575 by slu13913, on Flickr IMG_7572 by slu13913, on Flickr IMG_7573 by slu13913, on Flickr IMG_7589 by slu13913, on Flickr IMG_7591 by slu13913, on Flickr IMG_7597 by slu13913, on Flickr IMG_7606 by slu13913, on Flickr IMG_7612 by slu13913, on Flickr IMG_7609 by slu13913, on Flickr IMG_7616 by slu13913, on Flickr The glow from outside at night looks insane lol IMG_7627 by slu13913, on Flickr My helper along the way IMG_7632 by slu13913, on Flickr It's beginning to look a lot like Christmas IMG_7622 by slu13913, on Flickr Link to comment
FishBrawler Posted December 8, 2013 Share Posted December 8, 2013 LOVE how this build is coming along! Following! Link to comment
evan127 Posted December 8, 2013 Share Posted December 8, 2013 Wow! This build is coming along great! I like it! Link to comment
HiImSean Posted December 8, 2013 Author Share Posted December 8, 2013 Thanks! just went to a buddies house and came back with 3 zoas, a OAR BN and a pink lemonade Link to comment
HiImSean Posted December 10, 2013 Author Share Posted December 10, 2013 Man I love my Apex. I'm about 550miles away from home and can tell you my tank has been a constant 77.6F since sunday evening Link to comment
HiImSean Posted December 12, 2013 Author Share Posted December 12, 2013 I'm going to try to set up a QT tank this weekend. I'm prolly going to pick up a new clown, Picasso preferably or a snowflake and some sort of wrasse. I'm looking for a nice flasher or two. I'll add a fairy or two after I have a few flashers. Link to comment
HiImSean Posted December 16, 2013 Author Share Posted December 16, 2013 So what do I do ith this Link to comment
HiImSean Posted December 22, 2013 Author Share Posted December 22, 2013 Its been a busy few weeks since I transferred my corals and fish. Traveled M-Th both weeks and I'm finally in over the holidays. This week I came out to a GHA outbreak. I'm assuming it's just normal new tank syndrome. I don't have much of a CuC yet, just a few snails and a lone hermit crab from my old tank. I was going to order from Reef Cleaners but they're not shipping till the 30th. I'm mixing up some water right now to do a 20g WC. I'm going to try Reef Crystals out for a little bit since a lot of people here use it and seem to like it a lot. I also got around to cleaning up my mess under my stand with wires. Everything was kind of just thrown in there so I zip tied a lot of stuff and got it out of the way. It looks like I'm going to be shopping for a new skimmer. I like the SRO 2000int, it's pulling crud out already but it's just so large. It's a PITA to change my filter socks, which I've been doing about once a week. I'm not sure what I'm going to get but it's gotta have a smaller footprint than this guy. Still doing my research. Last little update is I had about 1/2-3/4 a gallon of RODI spillage. I hear a little noise and ran over to see a little puddle. My ATO line got moved and dumped the water in the stand which in turn leaked onto the hardwood floor. I got it up pretty quick thankfully. Looks like I'll be getting the Apex leak detection module and sensor now. I'm thinking of using the Kessil on my 25g Mr. Aqua that I've had for like 3 years empty lol My wife really wants a flame angel and I told her I will not risk it in my tank so I may do softies in the cube. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.