Adding an LED strip to the top of my Fluval Evo 13.5; 440 nm vs 445nm? does it matter?

[MultipleTankSyndrome]

Like the title says, I am trying to add an extra led strip to the top of my fluval evo 13.5 to make the coral pop a little more. 
Eventually(long time from now) moving to an AI Prime but want a temporary little extra punch but keep setup looking as stock as possible. 

 

So I am looking at these two strips....
https://www.ebay.com/itm/Aquarium-Reef-Coral-LED-Strip-445-nm-BLUE-Actinic-Light-12-1-ft-18-stunner-LEDs/281028484234

https://www.ebay.com/itm/Aquarium-440-nm-Actinic-BLUE-Moon-Light-LED-Strip-100-Lumens-Ft-Salt-Water-Reef/280905559007?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D2%26asc%3D20160323102634%26meid%3D6645b289292149938cd39ce2013924a0%26pid%3D100623%26rk%3D1%26rkt%3D6%26mehot%3Dpp%26sd%3D281028484234%26itm%3D280905559007&_trksid=p2047675.c100623.m-1

Does the difference in wavelength even matter?

Thank you in advance for any advice 🙂 

[Clown79]

If you are looking for coral pop then you want a royal blue 440nm - 465nm

 

Evil was kind enough to layout the importance of each led colour in the lighting section

 

 

[MultipleTankSyndrome]

picked up the 445 since they are closer to the desired range of the spectrum.
Thank you @Clown79 for the link! I should have looked around the forums more before posting 😛 

[Clown79]

You're welcome

[Tony Nano]

Hi,

 

Is it possible to share some pics of the new light? I am curious how much this cost you and how you added them to the stock LED light.

 

Thanks!

 

Anthony 

[MultipleTankSyndrome]

Sorry I am just now seeing this @Tony Nano ... I'll make sure to take some pics tomorrow and post them for you 🙂

[Tony Nano]

On 12/3/2018 at 9:57 PM, MultipleTankSyndrome said:

Sorry I am just now seeing this @Tony Nano ... I'll make sure to take some pics tomorrow and post them for you 🙂

Those pics would be nice 🙃

[Tony Nano]

On 12/3/2018 at 9:57 PM, MultipleTankSyndrome said:

Sorry I am just now seeing this @Tony Nano ... I'll make sure to take some pics tomorrow and post them for you 🙂

Just bumping to get your attention lol, I’d love to see pics! Not only of the tank with this but also how it’s set up, thanks! 

[MultipleTankSyndrome]

Im so sorry @Tonynano, I got the flu and have been bed ridden for days!

I will get you those photos tonight i promise!

[MultipleTankSyndrome]

I simply used silicone to attach it to the ridge next to the "OEM Light" holder

Now this won't give you a ai prime look or probably even as good as one of those amazon "black boxes", but it will definitely make it your tank less white/yellow and allow you to continue using the included hood.

I definitely will be adding another 1 on the other side.

[Tony Nano]

On 12/3/2018 at 9:57 PM, MultipleTankSyndrome said:

 

Awesome thanks! Do you notice a difference in the tank? Do the corals look better?