redline Posted February 23, 2003 Share Posted February 23, 2003 What should i do...? Should i place the overflow box top-center in my 20h and have 2 1/2 inch bulkheads on each back corner with separate locline nozzles attached to their respective bulkheads Or should I put the overflow box in the top right corner (as planned) and just have the single 3/4 inch bulkhead with a loc-line split-'Y' and two nozzles... I'm just thinking interms of intank flow movement right now. Link to comment
chodaboy Posted February 23, 2003 Share Posted February 23, 2003 the first is what i would do. Actually it is what im going to do. im gonna have a little over flow box back center. with two returns in through bolth sides alternating current via "scwd". after talking to the board they said that was probablly my best bet. Link to comment
redline Posted February 25, 2003 Author Share Posted February 25, 2003 Sounds good to me... thanks. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.