Pulldownyourpants Posted February 15, 2003 Share Posted February 15, 2003 If and when I get my tank drilled or do it myself, I will need the internal OF/prefilter boxes. My question is where about do I get the sucker drilled and where do I get the OF/PF for it. OH!! Holes will be on the back as the bottom is tempered. X) Someone point me in a direction. I've never laid eyes on a setup like this, so I'm missing the mental pictures! Link to comment
darkblade Posted February 16, 2003 Share Posted February 16, 2003 This might help with the mental picture.... WetDryFilter.com Link to comment
Pulldownyourpants Posted February 16, 2003 Author Share Posted February 16, 2003 So can those "glue'em to the corner" prefilters be purchased? Link to comment
darkblade Posted February 17, 2003 Share Posted February 17, 2003 I'm gonna say...prolly not. Should be easy to make though. One of those black plastic, hang on the wall file folder thingies from Office depot, some glue,and a saw or Dremel should do you just fine. You can attach it to the glass with reef safe epoxy and trim most of the excess that squeezes out with a razor blade. Link to comment
Pulldownyourpants Posted February 17, 2003 Author Share Posted February 17, 2003 Sounds pretty doable. Link to comment
wetworx101 Posted February 17, 2003 Share Posted February 17, 2003 Yes they can be ordered from ww.wetdryfilter.com. Custom Made, any number of angles, colors, notches. Check it out. Link to comment
darkblade Posted February 17, 2003 Share Posted February 17, 2003 I stand corrected...never thought to check. Seems cheaper and quicker to DIY....'sides, I like tinkering... ...prolly why I never thought to check Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.