Lord Nano Posted December 21, 2005 Share Posted December 21, 2005 I have a 10g Nano with ref underneath. I have a return pipe and a maxi-jet 400 powerhead for flow in the display. The return pipe from the sump is placed in the back right of the tank and i can aim it pretty much wherever i want. My question is where should i place the powerhead to create a good flow, ive been having problems with certain areas not getting enough water flow. (stand pipe overflow is in the back left corner). This is my display.... (the powerhead in the picture has been replaced by the maxi-jet) P1010083.bmp Link to comment
lgreen Posted December 21, 2005 Share Posted December 21, 2005 put the powerhead in the right corner, have both face diagonal towards the front center. Link to comment
Lord Nano Posted December 21, 2005 Author Share Posted December 21, 2005 in the front right or at the back right next to the return? Link to comment
lgreen Posted December 21, 2005 Share Posted December 21, 2005 on the opposite side of the return pipe on the back wall. Link to comment
Lord Nano Posted December 21, 2005 Author Share Posted December 21, 2005 So the powerhead in the back left and the return pipe in the back right, both aimed at the front glass? Link to comment
reffer9391 Posted December 21, 2005 Share Posted December 21, 2005 Ya that will create a movement of water that is unpedicably kind like oppisite flowing current. By the way this probley needs to be in the begginers Forum. Link to comment
lgreen Posted December 21, 2005 Share Posted December 21, 2005 So the powerhead in the back left and the return pipe in the back right, both aimed at the front glass? yep Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.