paingod Posted September 3, 2005 Share Posted September 3, 2005 I just realized that the back wall of the nano is glass & plastic. What is the best way to drill this back for bulkhead fittings? The galss scares me:o Has anyone drilled one??? Thanks Link to comment
oogie Posted September 3, 2005 Share Posted September 3, 2005 Are u talking about the back or the black divider? Back is glass and divider is plastic. I used dremel to drill the back glass. I used diamond bit and went really slow. Also I made sure glass was wet at all times. Check this thread for more info on NC modding. http://www.nano-reef.com/forums/showthread...&threadid=58771 Link to comment
paingod Posted September 3, 2005 Author Share Posted September 3, 2005 Cool ! It looks kile you cut the plastic back 1st, then drilled the glass? I have a dremmel, can you give info on the bit you used? Thanks Link to comment
paingod Posted September 3, 2005 Author Share Posted September 3, 2005 OOgie Please show saome pics of your return BH and pluming. Thanks Link to comment
puddle_divr Posted September 4, 2005 Share Posted September 4, 2005 Hey Paingod. I was comming over here from MR (300E on there)to see if I could find something for you... Pics always help!!! Link to comment
paingod Posted September 4, 2005 Author Share Posted September 4, 2005 I did get the starter holes drilled (NO Cracks)! I need to hit home depot for a smaller collar for my diamond bremel bit. I will be routing it out on Sunday! Link to comment
stoney waters Posted September 4, 2005 Share Posted September 4, 2005 I did the same as oogie, only for an IceProbe. DON'T SWEAT IT. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.