embryoguy Posted September 1, 2005 Share Posted September 1, 2005 nanocube owners......... what top off system are you using? what do you recommend for the cube? Link to comment
HkySk8r187 Posted September 1, 2005 Share Posted September 1, 2005 I highly recommend the top off that Chris sells at nanocustoms: http://nanotuners.nanocustoms.com/nanotune...&products_id=83 I have one and it has been perfect. It fits nicely in the back chamber of the 24g nano cube too. You can clip it onto the 1st divider in the back and it sits at a good height for a good water level. One thing you need to do if you get it is open it up and take out the speaker. When it kicks on it makes a really loud buzz. Takes 3 minuets to take it out though...works great. Link to comment
embryoguy Posted September 2, 2005 Author Share Posted September 2, 2005 thanks ! i heard about this buzzing sound Link to comment
HkySk8r187 Posted September 2, 2005 Share Posted September 2, 2005 Ya, easy to eliminate though, even if you dont know much about electronics you can locate the speaker and pull it off Link to comment
embryoguy Posted September 2, 2005 Author Share Posted September 2, 2005 has anyone used this for the 12 nc Link to comment
HkySk8r187 Posted September 2, 2005 Share Posted September 2, 2005 It will work just fine, you can adjust the height of the sensor so you can use it on any tank. Link to comment
Echo Posted September 2, 2005 Share Posted September 2, 2005 I use the Reef Fanatic on my 12g and have had no problems, plus no annoying buzzing sounds. http://www.premiumaquatics.com/Merchant2/m...ory_Code=Dosers Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.