coondogg97 Posted July 24, 2005 Share Posted July 24, 2005 I setup my 12OG nano when they first came out and some people suggested removing the plastic wall blocking the bottom intake to the filter. I have since broke down the tank and now im looking to set it back up. I installed a Hydor Flo and 96 watts of PCs. Now all thats left to do is the cassette tape overflow mod. Since I removed the plastic wall from the bottom part of the filter the overflow isnt working. Does anybody know where I can get that piece of plastic to mount back behind that opening? If not does anyone have any suggestions to block it without being able to see anything in the tank? Thanks, Brian Link to comment
thebrian Posted July 25, 2005 Share Posted July 25, 2005 Superglue a piece of plastic over it on the inside. Won't be visible, and the overflow will work again. ~Brian Link to comment
coondogg97 Posted July 25, 2005 Author Share Posted July 25, 2005 I thought about just dremmeling a piece of plastic and mounting it on the inside. But #1 my dremmel skills are horrible and #2 its impossible to measure how big that hole is.. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.