That_Nano_Guy Posted July 24, 2005 Share Posted July 24, 2005 I have three 12v blue LED's that I want to install ( maybe not all three but...) I was wondering if anyone with 12g JBJ nanocube who has installed LED's could tell me where the best spot to place them would be. I plan on drilling holes in the reflector. Should they be in the back, front, side where? Thank in advance for your time. Link to comment
FireFish21 Posted July 24, 2005 Share Posted July 24, 2005 i am also getting ready to install some. in another thread i saw where people were putting them under the splash guard in front of the lights Link to comment
sNEIRBO Posted July 24, 2005 Share Posted July 24, 2005 I don't know what the 12 Gallon Nano Cube splash gaurds look like, but here's where I put my add-on moonlights in my 24 Gallon I also pointed them up towards the reflector - it gives a more natural moonlight effect, instead of the spotlight effect. Link to comment
That_Nano_Guy Posted July 27, 2005 Author Share Posted July 27, 2005 Thanks for the pic sNEIRBO. The spplash gaurd is similar to yours. I did drill in the reflector to install one, and it does giva a spotlight effect. What do you have your Leds in? looks to be some sort of tube. Link to comment
sNEIRBO Posted July 27, 2005 Share Posted July 27, 2005 Those are the Fishbowl Innovations LED Moonlights a lot of people are using. Here's Fishbowl Innovations website if you want to check them out - http://fishbowl-innovations.com/ Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.