NY11 Posted June 3, 2005 Share Posted June 3, 2005 I am thinking of drilling a new hole lower in the black plastic divider in my 12 gallon nano cube, and putting in another powerhead to create more flow. Has anyone had any experience with this, and if so, what type of bulkhead did you use. I know the cube came with some type of locline bulkhead, but I'm not sure where to get one, or what size hole to drill. Thanks. Chad Link to comment
artarmon42 Posted June 3, 2005 Share Posted June 3, 2005 Tigah did something similar... http://www.nano-reef.com/forums/showthread...highlight=tigah Link to comment
LVReefer Posted June 3, 2005 Share Posted June 3, 2005 This is super easy to do. You can buy the bulkhead online from several aquarium suppliers; Marinedepot.com is where I got mine from. Link to comment
cward Posted June 3, 2005 Share Posted June 3, 2005 I did it to my NanoCube. http://www.nano-reef.com/gallery/showphoto...&cat=500&page=1 Link to comment
stoney waters Posted June 3, 2005 Share Posted June 3, 2005 You dont need a bulkhead. Just drill a hole the same diameter as 1/2" pvc. Then insert a 1" long piece half way through and seal with pcv cement. It is very similar to how the right side is done from the factory. Link to comment
NY11 Posted June 4, 2005 Author Share Posted June 4, 2005 Thanks for everyone's replies. I think I may give it a try. My cube is filled now, but I'm thinking about taking everything out, cleaning it up and drilling a new hole for a pump. Thanks for the help. Chad Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.