Green-Day711 Posted January 9, 2005 Share Posted January 9, 2005 hi i just got two cans of krylon fusion to paint my 5.5 gallon nano. the colors are a light blue, and a darker blue. i was wondering if i could start with the dark towards the bottom, and then fade into the lighter color towards the top. i know this has been done, but if anyone has any advice on how to do this, i would appreciate it. thanks Link to comment
Prunfarm Posted January 9, 2005 Share Posted January 9, 2005 All I can say is practice on some newspaper, and get the technique down. Oh, and mask the hell out of the tank - overspray sucks. Link to comment
Green-Day711 Posted January 9, 2005 Author Share Posted January 9, 2005 alright thanks should i just do two lines basically? one light and one dark? Link to comment
BigJosh Posted January 9, 2005 Share Posted January 9, 2005 I would spray on the light blue first and fade the rest with the dark blue. Link to comment
jenniebutterfly Posted January 9, 2005 Share Posted January 9, 2005 i agree with josh, do light coats, and i mean very light till you get the desired effect. when you get the light blue in the center the way you want it to look just spray the whole back with the dark blue Link to comment
Green-Day711 Posted January 9, 2005 Author Share Posted January 9, 2005 great idea, thanks! i will try it towmorow Link to comment
EnderG60 Posted January 9, 2005 Share Posted January 9, 2005 do the light color first then slowly work your way down with the darker color, spraying from far away doing light coats till you get what you want Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.