Modding an old retrofit kit

[borillion_star]

I am upgrading my LED Array retrofit kit that I have been sitting around unused and wanted to string them onto to 2x LDD-700H and 2x LDD-1000H drivers. I was going to use a Meanwell SE-350-48 but I am not sure how to wire them up without burning any out.

 

6 Philips Luxeon ES Neutral White 3v 1000mA
2 Philips Luxeon ES Lime 3v 1000
2 Philips Luxeon ES Cyan 3v 1000
1 Philips Luxeon ES Warm White 2.5v(?) 1000 (suspect voltage correctness)

 

1 Hyper Violet V3.0 415nm - 425nm 3v 700
2 Philips Luxeon ES True Cool Blue 3v 700
10 Philips Luxeon ES ROYAL BLUE 3v 700

 

Any Ideas appreciated. I would prefer to split them up into controllable channels if possible. The heatsink has 24 "seats"

[mcarroll]

Wish I could give you an answer.  Don't think there are many tweakers left doing that kind of DIY....hopefully someone chimes in though!