Daniel91 Posted April 4, 2019 Share Posted April 4, 2019 Is there a reason why my Acan would “shrink”? Everything else is thriving but it’s been like this for a few weeks now Nothing has really changed parameter wise since I added it. 0.026 salin, 8 - 430 - 1270 Nitrate 5-10 (not dirty enough)? AI Prime HD been in acclimation mode since Feb with ~0.8 degree increase daily I did upgrade my flow but in its current spot it gets pretty much the same low-med flow. Quote Link to comment
DreC80 Posted April 4, 2019 Share Posted April 4, 2019 If you are talking about the one on the left in the second pic, it doesn't look shrunken to me. It looks like it's reaching for light. Do you feed it at all? Quote Link to comment
Clown79 Posted April 4, 2019 Share Posted April 4, 2019 Acan sometimes close up, I find often while growing new heads. When mine get too much flow the heads separate/stretch like yours is. Lighting wise, I have found some like light while other acans don't. 1 Quote Link to comment
Daniel91 Posted April 4, 2019 Author Share Posted April 4, 2019 I fed it yesterday, so we’ll see I’ll try to put it in lower flow and give it some time to respond Quote Link to comment
ConnorD42 Posted April 22, 2019 Share Posted April 22, 2019 Mine did this the other day, but like Clown79 said mine are also growing new polyps/heads and I have mine in a little area in the middle of the tank where they're barricaded by surrounding rock to minimize direct flow and they never look unhappy to me. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.