burnah Posted September 27, 2004 Share Posted September 27, 2004 a friend of mine got a huge frag of pulsing xenia and i would like to know how to frag it because it is too big for his tank... also i would like to know if this coral was ok for my 3 gallon nano... thanks in advance, martin Link to comment
Korbin Posted September 28, 2004 Share Posted September 28, 2004 Ok. First thing you need for fragging is some dark colored clothes, a flashlight, a knife, and plastic bag with some water. Pick your friend's lock in the middle of the night, sneak in, and chop the xenia. Put it in the bag. Exit quietly. Your done! Seriously though. With xenia, you just give it the chop. Poke it into a small hole in the liverock or put it in a very low flow area on some rubble and it will slowly attach to the rock. Be carefull though, I heard the stuff will stink up your house. It should be fine in a 3 gallon as long as you have a half decent light. Link to comment
secretreef Posted September 30, 2004 Share Posted September 30, 2004 What i would do is....Put a rubber band aroundthe bottom untill it seperates. It will slowly pull away place it near some rock and it will attach to a smaller pieace or just cut the bottom but it will become very pissy. And yes it does stink (bad) and i swear the smell will linger for a month Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.