Beam all blue strips voltage

[Reefkid88]

Anyone know the voltage of both strings on these strips ? 

[Reefkid88]

.

[DaveFason]

6 hours ago, Reefkid88 said:

.

We can run off the datasheets but it will always be slightly different and I can look it up based on the older T, SEMI, Rebel. What exactly are you doing? Run together or separate? 

 

[Reefkid88]

Just wanted to know for driver purposes and what the voltage was. 

[DaveFason]

11 hours ago, Reefkid88 said:

Just wanted to know for driver purposes and what the voltage was. 

I would use the Mean Well LDD-H or -L, Blue Acro driver or something along those lines. If you are running two separate series you can use a 12v PS, if running both use a 24v. On all builds I run a max of 700mA. 

 

-Dave

[Reefkid88]

Okay,I'm just trying to add up all my voltage so I can figure some things out and all I need is the voltage of the leds on the planted strip. So no specific numbers ? 

12 hours ago, DaveFason said:

I would use the Mean Well LDD-H or -L, Blue Acro driver or something along those lines. If you are running two separate series you can use a 12v PS, if running both use a 24v. On all builds I run a max of 700mA. 

 

-Dave

 

[DaveFason]

String 1 : ~8.6vF

String 2 : ~8.25vF

[Reefkid88]

4 hours ago, DaveFason said:

String 1 : ~8.6vF

String 2 : ~8.25vF

 And what current is that at,do you know ? 

[DaveFason]

1 hour ago, Reefkid88 said:

 And what current is that at,do you know ? 

That is running 700mA.