Reefkid88 Posted October 28, 2017 Share Posted October 28, 2017 It just had 2 3ups for a fuge,using 2x 300mah drivers and a 24v psu. I want to make it reef capible now. Question is,what is the voltage on all the channels on the newest array ? Could I even power half or it or what ? It'll simply be on and off until I can get a storm controller. Quote Link to comment
DaveFason Posted October 29, 2017 Share Posted October 29, 2017 I am not 100% sure what you want to do? Replace the array on the unit? If so you can still use the 24v power supply. If the drivers are LDD-H you can use those as well but will need to group the different channels together. -Dave Quote Link to comment
Reefkid88 Posted October 29, 2017 Author Share Posted October 29, 2017 1 hour ago, DaveFason said: I am not 100% sure what you want to do? Replace the array on the unit? If so you can still use the 24v power supply. If the drivers are LDD-H you can use those as well but will need to group the different channels together. -Dave Correct,I just wabted to know what the voltage for each channel was on the v3.1 with mint was,so I can get a idea of what channels I can use,unless you think I can run all the channels into 2 channels. The drivers are h's and 300 or 350mah I can't remember. Quote Link to comment
DaveFason Posted October 30, 2017 Share Posted October 30, 2017 If you want two channels then run the following.... Royals, Blue, Cyan - CH1 Mint, White, violet - CH2 Easy as that! 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.