mathom Posted March 9, 2017 Share Posted March 9, 2017 Hi everyone, I'm new here, I've been active mostly on polish forums. I've wrote an arduino controller for DIY lamp (default 8 PWM channels, expandable to n-channels) with full touch LCD panel (Nextion lcd) and temperature/cooling support. It was written mostly for polish nano-reef.pl community, but I've decided to share it with other communities. It's open source, available on github: https://github.com/mathompl/AquaLed Some features: - 6 channel PWM control of LED modules (drivers), with I2C module up to 512 (up to 8 channels on LCD) - programmable light hours with sunsets and sunrises - night light support - 3 digital thermometers with asynchronous temperature read, for: water, lamp and addictional lamp or sump, controlling 3 separate relays (cooling fans) - customizable dimming, linear or logarithmic algorith - bluetooth compatibility with AQma Led Control by Maqu http://magu.pl/aqma-led-control - full configuration and status using Nextion 2.8" LCD with touch support, including: operational hours, sunset & sunrise hours, thermometers, dimming times, schedule, night mode etc. - override programs: off, night and user accessible from LCD - date/time support with RTC module - screen saver with water temperature and time - test mode - all settings stored in EEPROM - works on Arduino Nano Please feel free to use it and send feedback ps. been using it on my 250L reef for one month now. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.