Halo_003 Posted March 7, 2016 Share Posted March 7, 2016 I'd like to solder wires to the two holes above the mini USB input, can I power it with 12v from that point? If so that would make things easier. Thanks! Link to comment
SpencerShepard Posted March 8, 2016 Share Posted March 8, 2016 Yes, anything from 3.3V-17V is fine. Link to comment
Halo_003 Posted March 8, 2016 Author Share Posted March 8, 2016 Yes, anything from 3.3V-17V is fine. Perfect, thank you! Link to comment
mpad Posted March 12, 2016 Share Posted March 12, 2016 You may not need to solder wires, the pins for the ribon cable already have the power input. take a look at the quick setup guide.- Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.