capture Posted October 24, 2015 Share Posted October 24, 2015 I’ve been in and out of the hobby for years. I think since 2007/2008. Back in March I started a little 7 gallon Deep Blue cube and I’ve been adding things, moving things around, making changes and mistakes. I built myself a bench in the basement back in May and haven’t been happy with the setup. The tank gets neglected. So I’ve been contemplating a change. Lets get to the part you guys are here for. A few weeks ago I took my son to an LFS and he couldn’t stop staring and talking to all the fish. I decided I need more tank space for fish. Just so happened the LFS had a used 30 gallon rimless frag tank sitting in the corner. I have always liked the dimensions and look of the 30 gallon frag tanks. He gave me a good deal and it was in my car. So, now the journey begins. I’m no expert but I’ve done my fair share of learning from reading here and other forums as well as with trial and error. I look forward to hearing your thoughts and ideas as this moves on. I have a rough plan for what I have in mind. Details will come as I move along but hoping you guys enjoy. Being a photographer I love photos as much as the next guy so I’ll make sure to keep my post stocked with photos as I can. I’ll start with a teaser.Here is my tank back in April. I think I put in my first zoanthid frag at this point. Link to comment
capture Posted October 26, 2015 Author Share Posted October 26, 2015 So I got the tank and nowhere to put it. So I started with a stand. The stand started as 3/4" Birch plywood. I didn't go with anything too expensive as it was going in the basement. I wanted simple, clean and sturdy. With no truck you gotta get the goods home somehow. Before breaking down my ply I build myself an 8' zero clearance track for my saw. The hope was to get some nice straight square cuts. Worked pretty well. Ply ready to be worked. Track for the saw. Completed track. Here is the stand before I realized I made a mistake. Link to comment
capture Posted October 27, 2015 Author Share Posted October 27, 2015 I realized after I set the tank on top that I got carried away and instead of making the door a door - I attached it to the stand. This wasn't my intent. Thankfully, I caught my mistake before the glue had set. You can see the pocket holes that attached the door to the stand. Unfortunately, they will haunt me for the life of the stand. After removing the door I completed the stand as I had planned. I measured out the hole for pipes and wires and things. Finished cutting out the hole. Then on to the finish. I didn't want to stain it cause I liked the look of the birch by itself. Poly on left side, nothing on right. Tonight I put the second coat of poly on the door. Now I'm waiting for my hinges that I ordered from Rockler. I'm about to order an overflow box. Eshoppes is that I'm thinking of going with since my tank isn't drilled. I'm thinking 400 GPH turnover is sufficient. Anyone have any suggestions otherwise? Would love to hear some opinions. Link to comment
vlangel Posted October 27, 2015 Share Posted October 27, 2015 I have an overflow box and have been very pleased. My 1 suggestion is match the return pump minus head loss as close to the overflow box capacity so that it runs quieter and no air bubbles build up in the U-tube. My overflow box is a bit bigger than my 9.5 magdrive going through a chiller and UV sterilizer can match. It's pretty quiet but I did get a few air bubbles. I remedied that by drilling a small hole and inserting airline tubing and hooking it to an Aqualifter pump. That way if the electric goes off, the aqualifter pump will automatically start the syphon. I have been using the same overflow box and system since about 2007 so it works pretty good. Link to comment
wow.such.chris Posted October 27, 2015 Share Posted October 27, 2015 Nice work on the stand so far. Looking foward to seeing this progress. Is it jusy plywood to the floor, no other supports? Link to comment
capture Posted October 27, 2015 Author Share Posted October 27, 2015 I have an overflow box and have been very pleased. My 1 suggestion is match the return pump minus head loss as close to the overflow box capacity so that it runs quieter and no air bubbles build up in the U-tube. My overflow box is a bit bigger than my 9.5 magdrive going through a chiller and UV sterilizer can match. It's pretty quiet but I did get a few air bubbles. I remedied that by drilling a small hole and inserting airline tubing and hooking it to an Aqualifter pump. That way if the electric goes off, the aqualifter pump will automatically start the syphon. I have been using the same overflow box and system since about 2007 so it works pretty good. Thanks @vlangel. I'll be keeping this in mind. Nice work on the stand so far. Looking foward to seeing this progress. Is it jusy plywood to the floor, no other supports? @sooch - Right now it is just ply to the floor. I haven't checked for level. I may put some leveling feet but I haven't decided yet. I boxed out the bottom and added the top. Between the glue, the build and the pocket holes this thing is really solid. Also, this entire stand is from one sheet plywood. The second sheet was just in case/for other projects and the track for the saw. Link to comment
wow.such.chris Posted October 27, 2015 Share Posted October 27, 2015 Here's my suggestion for the overflow. Link to comment
wow.such.chris Posted October 27, 2015 Share Posted October 27, 2015 What are you using for a sump? Link to comment
capture Posted October 28, 2015 Author Share Posted October 28, 2015 Here's my suggestion for the overflow. Awesome suggestion. I like that a lot. Have you used or do you have one of these? Certainly looks better than one of the eshoppes overflows I was reluctantly thinking about getting. What are you using for a sump? I was going to use a 10 gallon for a sump since I have one sitting around. Its not as big as I might like but I think it will get the job done. I was intending on using one of the Ocean Box Design kits for baffles. I'm trying to keep the cost down but I also don't want to completely cheap out on anything. Link to comment
wow.such.chris Posted October 29, 2015 Share Posted October 29, 2015 Awesome suggestion. I like that a lot. Have you used or do you have one of these? Nope, but quite a few people here have them. Search for 'ghost overflow.' Here's a cool one: http://www.nano-reef.com/topic/351761-ngahbs-34-gallon-major-rescape-and-a-nem-split/: Link to comment
capture Posted October 29, 2015 Author Share Posted October 29, 2015 So I'd have to drill my tank for this to work? Nope, but quite a few people here have them. Search for 'ghost overflow.' Here's a cool one:http://www.nano-reef.com/topic/351761-ngahbs-34-gallon-major-rescape-and-a-nem-split/: Looks like this guy drilled a deep blue tank with no problems. So sides aren't tempered huh? So much to do. Link to comment
wow.such.chris Posted November 2, 2015 Share Posted November 2, 2015 So I'd have to drill my tank for this to work? Looks like this guy drilled a deep blue tank with no problems. So sides aren't tempered huh? So much to do. Yeah you have to drill. I think that all but the back glass is tempered but don't take my word for it. Link to comment
Orangutran Posted November 2, 2015 Share Posted November 2, 2015 just the photo of your jig saw is sexy! Link to comment
capture Posted November 7, 2015 Author Share Posted November 7, 2015 Yeah you have to drill. I think that all but the back glass is tempered but don't take my word for it. Hmm... I may have changed my mind on this. I'm trying to go simple and keep my costs down. The overflows you sent, I love but it costs more and then I'd have to buy a drill for the overflows. Still thinking about it. just the photo of your jig saw is sexy! Simmer down now. Link to comment
capture Posted November 7, 2015 Author Share Posted November 7, 2015 So now for an update: I've attached some adjustable feet. I cut down some 4x4 blocks. Then I drilled holes to put in the 1/2" x 1 1/2" lag as adjustable feet. I'm thinking this may be my best bet when it comes to adjusting for the variances in the basement floor. I used some glue and some ledger bolts I had from another project to attach the blocks. I countersunk the heads into the stand. I think it should be plenty to hold the weight of the tank and stand. Just a reminder: I'm not going for best looking stand since its in the basement so I'm not too concerned with seeing the bolts. I did however, measure their locations out so they are all symmetrical and stuff. I'm trying to get some water in the tank to at least get it cycling. I leave for work in Puerto Rico for a week so it would be nice to have it going before I jet. Link to comment
malacoda Posted November 7, 2015 Share Posted November 7, 2015 Cool. Pretty clever means of having adjustable feet. I'm in the process of building a plywood stand for my 25g that is very similar in design and appearance to yours and I ended up going with four $6.50 heavy duty leveler legs from Woodcraft. If I were putting my stand on concrete I'd be pretty PO'd that I didn't think of the simple ledger bolt concept you came up with; I'm putting it on carpet though so I won't kick myself (this time) for coming up with similar cost-effective solution like yours. Good luck with the build. Looking forward to seeing it progress. Link to comment
capture Posted November 7, 2015 Author Share Posted November 7, 2015 Cool. Pretty clever means of having adjustable feet. I'm in the process of building a plywood stand for my 25g that is very similar in design and appearance to yours and I ended up going with four $6.50 heavy duty leveler legs from Woodcraft. If I were putting my stand on concrete I'd be pretty PO'd that I didn't think of the simple ledger bolt concept you came up with; I'm putting it on carpet though so I won't kick myself (this time) for coming up with similar cost-effective solution like yours. Good luck with the build. Looking forward to seeing it progress. Thanks Mal. $6.50 is not bad in terms of price. I spent $2 on the bolts and the rest was leftovers from other projects and some time. I'll have to check out the Woodcraft legs for other projects. Problem is they are kind of far from where I live. Link to comment
malacoda Posted November 7, 2015 Share Posted November 7, 2015 I should've been a little more clear -- they were $6.50 each, so $25 for four. Like I said, not too bad given that they have wide feet (~1.5" dia.) which is good for carpet and are rated to 440 lbs each; but a bit pricey in comparison to your $2 ledger bolt solution. Link to comment
capture Posted November 8, 2015 Author Share Posted November 8, 2015 Mal, $25 isn't too bad either for some peace of mind. I looked those up - they look pretty beefy. Link to comment
capture Posted December 2, 2015 Author Share Posted December 2, 2015 I'm back from Puerto Rico and its after Thanksgiving. I had to finish roofing the porch I'm building on my house before the winter really kicks into gear and I finally got that accomplished. Now its time to go full bore into this 30 gallon. There is now water and some rock in the tank and an old light above it. Its been running for 2 weeks now. I ordered a few things this week while there were sales all over the inter webs. I'll update on this soon. I knew I had a bunch of dry rock somewhere from an old system. I found it this weekend and now I'm debating using it and putting whatever may have been on it during my previous go around into a new tank. Its been sitting around for 5+ years untouched? My other option is to go buy some new Life Rock or similar. I don't think there was much of an issue with my previous system other than the typical bubble algae but I sort of remember having these little tiny curly white things all over the tank at some point before. I'm just afraid of something I don't want in the tank to be there from the start and rearing its ugly head a little down the road. Anyone have thoughts on this? Link to comment
capture Posted December 4, 2015 Author Share Posted December 4, 2015 Got an order in today from World Wide Corals. Letting them come up to temp in the new tank. Moved them over to the 7 gallon afterwards for acclimation and they are opened up and looking good for now. Link to comment
RollaJase Posted December 4, 2015 Share Posted December 4, 2015 Really nice DIY, stand looks great and your photography is fantastic. Link to comment
charliethezero Posted December 4, 2015 Share Posted December 4, 2015 Looking good. If you like your old rock, just give it an acid bath and that will strip anything left on it off. Link to comment
capture Posted December 7, 2015 Author Share Posted December 7, 2015 Saturday and Sunday of this weekend were super nice here in Connecticut so I had to work on the rock. I have quite a bit of travel between now and Christmas so I crammed what I could between working and hanging out with the family. Hoops on Saturday and smokey burnouts on Sunday.Back to reefing:I found uphoric's thread on what to do with Old Live Rock and the video there was really helpful. Slow, but helpful. So I got to workSafety firstHere are some rocks that have been sitting around for close to 5 years and everything that was and still is on them.Heres all the rock and crud that came off the rock when I filled the bucket with water.Acid in bucket and reactionAfter about ten minutesNow to neutralizeMore bubblesAfter the first rinseOnce in the the bucket I put some bleach in and let it soak over night. Everything is now soaking in a bucket with water and a dechlorinator. I've switched out the water a few times and I'm a little bothered by the smell of the rock. Still smells like bleach. Anyone have experience with this. I'm not sure I want to put it in the tank anytime soon.In all it was pretty easy. My only tip is have a good hose or a bucket of clean water standing by just in case. I also had to do the acid bath twice as the first bucket had a huge crack I wasn't aware of in the bottom.If interested here are some more photos from the acid bath. Link to comment
dpoltsdsu Posted December 8, 2015 Share Posted December 8, 2015 If it smells like bleach, I wouldn't put it anywhere near your tank. You take great pictures, should be an awesome thread. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.