MP10 On a 20gallon?

[isaacharry]

Hi so i have a MP10 on a 20 gallon with zoas, sps and LPS

 

What setting should it be on

[HarryPotter]

Depends. However much you like in terms of intensity. I like ReefCrest mode

[spectra]

I run the Reef Crest mode on my Fusion 20. I think I am at about 50 to 60 % on it.

 

I did have to move it up as I had the sand all move around on the back wall.....

[righttirefire]

I have a 20 long. I run short pulse mode on the longest pulse timing and 50% intensity... I ran reef crest until my anenome walked onto it. But no anenomes I'd be on reef crest still. I also have a return pump turning about 200gph.

[blizzardscout2]

Hello,

 

I also run reef crest at 50% in my BC14. It moves nutrients very efficiently.

[Exodus]

If you head over to EchoTechs Site they have a calculator to figure out what setting should be maxed at.

http://ecotechmarine.com/calculator/

[Matteo]

Reef crest mode FTW

[michaelrzachmann]

Hello,

 

I also run reef crest at 50% in my BC14. It moves nutrients very efficiently.

same. agreed

[Bingo1213]

When I had a 25 I had mine hooked to my apex and it switched through different modes at different times. But my favorites are short pulse and reef crest for sure!

[Markburns43]

In conjuction with my ac 70 I run mine at 40 percent max using reef crest or sometimes I think constant works well for me butnthats becuase it intersects my ac70nflow and makes a sweet current .oh on a 10 gallon mixed reef.

[RyvBoy]

I joint the conversation.

i got my 25 g nano cube and at the moment I’m running it 50% reef crest