ETCs_Lady Posted March 21, 2015 Share Posted March 21, 2015 I need help! My retro kit came. Now what!?!?! I ordered 4x 4,000K, 4x Lime, 12x Royal Blue, 4x Cool Blue. I have two drivers... what configuration do I use? And then ... what percentage do I start out with before ramping it up. My tank is a BTA with clowns. Link to comment
Caravanshaka Posted March 21, 2015 Share Posted March 21, 2015 Which drivers are you using? With 2 drivers, I would probably put the royal Blues on one, and the other LEDs on another. However, if you are using Rapids nano drivers, they will only support enough voltage to run 10 LEDs. As for percentage, depends on the mah rating of the driver. I good place to start is 25%...corals recover better from too little light rather than too much light. Link to comment
ETCs_Lady Posted March 22, 2015 Author Share Posted March 22, 2015 Solderless Coralife Biocube 29 Dimmable Retrofit Kit Driver Type: LDD-H-4 + LDD-H drivers + SE-350-48 power supply, LED Color Ratio: 4x 4,000K, 4x Lime, 12x Royal Blue, 4x Cool Blue, Dimming Accessories: Storm Controller We went with all Royal Blue on one and then all others on the second, mixed them up in a broken pattern. Trying to figure out the storm controller and the mounting under the hood. The directions are for a different version than ours. Very confusing. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.