Greshman Posted March 8, 2015 Share Posted March 8, 2015 I have a Steve's LED retrofit for a 29g BC on order. I ordered it with the Bluefish controller. If I can ever figure out how to upload pictures on here I'll give a post once I install them. Link to comment
DaveFason Posted March 8, 2015 Share Posted March 8, 2015 I have a few people using this set up are running 180 ( Blue ) and 120 ( white ). With how close the heatsink is to the water line you don't need to max it out by any means. -Dave Link to comment
sg1 Posted March 8, 2015 Author Share Posted March 8, 2015 Wouldn't that be too bright? I don't want it too white. I want to have a little bluiesh during day Link to comment
basser1 Posted March 9, 2015 Share Posted March 9, 2015 I have mine at 200 blue and 110 white Link to comment
Dmcoates Posted March 14, 2015 Share Posted March 14, 2015 I have mine at 200 blue and 110 white Did you start like that. I just installed the retort fit and I am running 180 blue and 95 white. I do have one sps in the middle on the tank so I'd like to make sure that's plenty of light. Thanks Link to comment
DaveFason Posted March 14, 2015 Share Posted March 14, 2015 Did you start like that. I just installed the retort fit and I am running 180 blue and 95 white. I do have one sps in the middle on the tank so I'd like to make sure that's plenty of light. Thanks I would say watch your coral. Some tanks will be completely different. Start with what you have and then ramp up if you see a need. -Dave Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.