matt144007 Posted February 5, 2015 Share Posted February 5, 2015 I've got one led in my string that refuses to exept a wire. Any advise on how to "reset the opening" or force one in. Thanks in advance Matt Link to comment
jedimasterben Posted February 5, 2015 Share Posted February 5, 2015 It happens to a few from each batch, when the connectors are soldered onto the PCB a little too much solder wicks up into it and makes it to where it can't move. Click 'Contact Us' at this link and they'll get you straightened out. http://www.ledgroupbuy.com/contact-us/ Link to comment
ktipp Posted February 5, 2015 Share Posted February 5, 2015 Or just solder it on that one side as needed Link to comment
matt144007 Posted February 5, 2015 Author Share Posted February 5, 2015 Thanks for the quick replies!! I'll probably just break out the soldering gun,just kind of defeats the purpose of buying solderless. I'll contact them also. Link to comment
ktipp Posted February 5, 2015 Share Posted February 5, 2015 Agreed but who wants to wait. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.