judd Posted September 19, 2014 Share Posted September 19, 2014 have you guys tried an ato at the back chamber of a fluval spec v with media basket? if so, which ones work? Link to comment
Mckinney0171 Posted September 19, 2014 Share Posted September 19, 2014 I have the tunze nano ato with the spec v media basket. Works fine for me. Link to comment
judd Posted September 19, 2014 Author Share Posted September 19, 2014 where and how did you mount it? can you post a pic? thanks Link to comment
Mckinney0171 Posted September 19, 2014 Share Posted September 19, 2014 I put the float valve over one of the long walls (rear wall for me) and ran the fill line up over the light and into the pump chamber. I cut a hole in the plastic lid for the float valve to fit. If I get a minute I will send a picture of what I mean. Keeps the water level very consistent. Link to comment
inTank Posted September 19, 2014 Share Posted September 19, 2014 I don't see using the supplied magnet attached to the float with the Tunze 3152, it's just too tight in chamber three. But it could be used if you mounted the float on your own way. It's small enough to fit in the pump chamber. Unless Mckinney figured it out http://shop.mediabaskets.com/Tunze-Nano-Osmolator-3152-3152000.htm Link to comment
BRADYBUNCH7 Posted September 21, 2014 Share Posted September 21, 2014 maybe the smart ato very small! Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.