daddykev Posted August 19, 2014 Share Posted August 19, 2014 This is my third wind back into the hobby. My reefing adventures began as child in the 1980s, helping my Dad maintain a 40-gallon reef with limited success. In the early 00s, I managed to convince my then-girlfriend/now-wife to allow a 60-gallon reef into our living room. Now it's 2014 and I'm back in the game with my very first nano reef. I'm thrilled to say the least. I really love the form factor of the Innovative Marine Nuvo Nano 16. I've also been completely amazed by the advancements in reefkeeping technology since my last foray in the early 00s. Being a complete technology geek in almost every other avenue of my life, it's only appropriate that I am embracing the "techno reef" approach. I was also very inspired by StevieT's Nuvo 16, so mine has a few similarities. Hardware Apex Jr controller Apex WXM module (EcoTech Wireless Control) Apex PM1 module w/standard pH probe Apex PM2 module w/scientific salinity probe EcoTech Marine MP10wES Eheim Jager TruTemp 75w heater Tunze Nano Osmolator 3152 - ATOFiltration inTank IM16 Media Baskets (pair - each w/filter floss, 100 mL Purigen, 3.1oz Chemi-Pure Elite) Stock IM16 filter pumpTunze 9001 Protein Skimmer Replaced with IM "AUQA Gadget" SkimMate Protein SkimmerLightingStock IM16 lighting EcoTech Marine Radion XR15w Pro LED with RMS XR15 Tank Mount Link to comment
Sk8n Reefer Posted August 19, 2014 Share Posted August 19, 2014 Tanks looking great. I am 5 months into my Nuvo 16 SPS tank. Great little tanks. I would recommend getting a screen top and remove the glass- mine would fog up terrible on the sides. I also replaced my pump with a Sicce 1.5 (358gph) with two IM spin streams- produces nice random currents- but your MP10 will help with that. I really like their reactors for running carbon and occasional GFO for phosphate control. Great choice in lighting also. Check out my link below to my Nuvo build. Good luck- looking forward to following along. Link to comment
daddykev Posted August 19, 2014 Author Share Posted August 19, 2014 Tanks looking great. I am 5 months into my Nuvo 16 SPS tank. Great little tanks. I would recommend getting a screen top and remove the glass- mine would fog up terrible on the sides. I also replaced my pump with a Sicce 1.5 (358gph) with two IM spin streams- produces nice random currents- but your MP10 will help with that. I really like their reactors for running carbon and occasional GFO for phosphate control. Great choice in lighting also. Check out my link below to my Nuvo build. Good luck- looking forward to following along. Thanks for your feedback. I definitely want to replace the stock filter pumps soon, as well as invest in the spin streams. Here was the tank on Day #1 (August 2, 2014). I started with 20 pounds of Nature's Ocean Bio-Activ Live Aragonite Reef Sand. Also 20 pounds of cured live rock from my LFS. Pretty cloudy at first, not unexpected on the first day. Link to comment
skyzpop Posted August 19, 2014 Share Posted August 19, 2014 Like the look of your scape, good luck! Link to comment
daddykev Posted August 19, 2014 Author Share Posted August 19, 2014 Like the look of your scape, good luck! Thank you. Skyzpop, I'm loving your Nuvo 16 as well. Great build! Link to comment
daddykev Posted August 19, 2014 Author Share Posted August 19, 2014 Here was the first night (August 2, 2014). Still murky, but things turned took a major turn for the better by morning time Link to comment
GtTap Posted August 19, 2014 Share Posted August 19, 2014 What does it look like now. Link to comment
daddykev Posted August 19, 2014 Author Share Posted August 19, 2014 Day #2 (August 3, 2014) morning time. Things starting to settle. Day #8 (August 9, 2014) mid day. Water testing near perfect. Added a percula clown. Link to comment
Smithjm5 Posted August 20, 2014 Share Posted August 20, 2014 Looks good! Didn't know if you saw this was relased- http://www.marinedepot.com/EcoTech_Marine_RMS_Single_Radion_Tank_Mount_Mounting_Options_for_Aquarium_Lighting-EcoTech_Marine-EM30331-FILTACMO-vi.html Link to comment
daddykev Posted August 20, 2014 Author Share Posted August 20, 2014 Nice coming along well. Thank you very much. I'm editing a video of my tank from 8/9/14 right now. Curious what you think. Looks good! Didn't know if you saw this was relased- http://www.marinedepot.com/EcoTech_Marine_RMS_Single_Radion_Tank_Mount_Mounting_Options_for_Aquarium_Lighting-EcoTech_Marine-EM30331-FILTACMO-vi.html Thanks for the heads up. Already pre-ordered Link to comment
daddykev Posted August 20, 2014 Author Share Posted August 20, 2014 A short video of my new tank approximately 1 week after inception (08/09/14). Link to comment
Sk8n Reefer Posted August 20, 2014 Share Posted August 20, 2014 Looking good- nice selection of rock! What are you feeding your clown? Link to comment
daddykev Posted August 23, 2014 Author Share Posted August 23, 2014 Looking good- nice selection of rock! What are you feeding your clown? Feeding him frozen Piscine Energetics PE MYSIS (freshwater mysis shrimp). Link to comment
Sk8n Reefer Posted August 23, 2014 Share Posted August 23, 2014 Feeding him frozen Piscine Energetics PE MYSIS (freshwater mysis shrimp). thanks - I'll have to try the frozen Piscine Energetics Link to comment
partyboizz01 Posted September 2, 2014 Share Posted September 2, 2014 Man that looks awesome! I need to get my pics up of my Nuvo, been running since April haven't add much, would like to see what Ppl have to say. Link to comment
daddykev Posted September 5, 2014 Author Share Posted September 5, 2014 Alright folks, I'm about a month after initial setup. Things are going wonderfully so far. I had been patiently awaiting the release of the EcoTech RMS XR15 tank mount, and they were finally in stock at Vivid Aquariums. Behold, the EcoTech Radion XR15w Pro with RMS XR15 tank mount on a Nuvo 16: Link to comment
rengb6 Posted September 5, 2014 Share Posted September 5, 2014 Your tank looks great! I have the same tank and light but after seeing the new mount on yours I'll have to buy it. Just a warning though, your clownfish can probably slip out through the gap in the glass lid. One of my clowns did it last week for the first time, after 3 months of being in the tank, so I had to rush to make the DIY netting cover. Link to comment
Sk8n Reefer Posted September 5, 2014 Share Posted September 5, 2014 Your tank looks great! I have the same tank and light but after seeing the new mount on yours I'll have to buy it. Just a warning though, your clownfish can probably slip out through the gap in the glass lid. One of my clowns did it last week for the first time, after 3 months of being in the tank, so I had to rush to make the DIY netting cover. Ya, I bought a screen kit from BRS- super easy to make . My glass top was a complete mess- it would always fog up on me- the screen top is nice and easy to remove when feeding- I would highly recommend . Alright folks, I'm about a month after initial setup. Things are going wonderfully so far. I had been patiently awaiting the release of the EcoTech RMS XR15 tank mount, and they were finally in stock at Vivid Aquariums. Behold, the EcoTech Radion XR15w Pro with RMS XR15 tank mount on a Nuvo 16: photo(6).jpg The set up is looking good! Link to comment
daddykev Posted September 5, 2014 Author Share Posted September 5, 2014 Your tank looks great! I have the same tank and light but after seeing the new mount on yours I'll have to buy it. Just a warning though, your clownfish can probably slip out through the gap in the glass lid. One of my clowns did it last week for the first time, after 3 months of being in the tank, so I had to rush to make the DIY netting cover. Thanks for the feedback. I definitely want to replace the glass lid soon. Link to comment
daddykev Posted September 5, 2014 Author Share Posted September 5, 2014 Ya, I bought a screen kit from BRS- super easy to make . My glass top was a complete mess- it would always fog up on me- the screen top is nice and easy to remove when feeding- I would highly recommend . The set up is looking good! Thank you. I am going to make an order from BRS soon! Link to comment
arocha55 Posted September 17, 2014 Share Posted September 17, 2014 Nice work daddykev! I've also purchased a Radion xr15w for my nuvo 16, was wondering if you could share your current settings for it? Are you running artificial or one of the preset options? Thanks! Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.