wsnyder6 Posted August 3, 2012 Share Posted August 3, 2012 Hi, Anyone have any ideas why my Biocube 8 10k would suddenly stop working. Fan works. 10k doesn't light. No dark spots to indicate burn out. Tried switching the ballasts, still doesn't work. Tried switching bulbs with the actinic in the 10k socket - the actinic fires up very dimly not 100% Something wrong with the hood? Curious to know what you Biocube owners have experienced. Thanks reading and any help you can offer! --Bill Link to comment
CAmor07 Posted August 3, 2012 Share Posted August 3, 2012 I have never experienced it, although im sure if you contact the company they will fix it for free. Just expect 1o days before you receive a email Link to comment
damage31 Posted August 7, 2012 Share Posted August 7, 2012 there is a cap on the bulb socket connector- I believe it is used to help the bulb start up. it may have gone bad. I just did LEDs in my biocube 8 and have a hood bulb socket just laying here if you wanted to try a new socket. just cover shipping cost and its yours... Link to comment
wsnyder6 Posted August 7, 2012 Author Share Posted August 7, 2012 damage31 - thank you for the offer. I think I will take you up on that. If Paypal is good, shoot me a PM with your address. --bill there is a cap on the bulb socket connector- I believe it is used to help the bulb start up. it may have gone bad. I just did LEDs in my biocube 8 and have a hood bulb socket just laying here if you wanted to try a new socket. just cover shipping cost and its yours... Link to comment
nor_cal_nano Posted August 7, 2012 Share Posted August 7, 2012 Those ballasts go out occasionally. I think i had that problem. Call oceanic. Their CS was awesome IME Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.