imsuperjp Posted March 5, 2004 Share Posted March 5, 2004 I just bought the aquaclear 500 to convert to a fuge. In the instructions, there is a lever on the bottom of the motor to adjust the close, but on mine, i do not see such a lever. Does anyone know if it a piece im suppose to add or is there another way i can adjust it? Link to comment
LikemyRams Posted March 5, 2004 Share Posted March 5, 2004 on the intake tube it moves from center to the right you can also raise up a little if the flow is to much Link to comment
imsuperjp Posted March 5, 2004 Author Share Posted March 5, 2004 sorry, but i dont quite understand. Link to comment
sdbeazley Posted March 5, 2004 Share Posted March 5, 2004 THe upside down U shaped intake can be adjusted to high flow (left) or turned right for lower flow. You simply turn the knob residing in the only hole on the lid the direction for desired flow. It has a right triangle on it with the the second longest side facing down. Link to comment
imsuperjp Posted March 5, 2004 Author Share Posted March 5, 2004 ok....gotcha...thanks. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.