beyondcomp251 Posted January 30, 2011 Share Posted January 30, 2011 I installed Stevie T's media rack/Tunze with Stevie T cup and it seems regardless of where I have the water level see on the tunze it will ultimately bubble up so much that the cup fills with water. Ive tried to tweek it raises it up and down on the water level mark...any pointers? Link to comment
uwwmatt Posted January 30, 2011 Share Posted January 30, 2011 I installed Stevie T's media rack/Tunze with Stevie T cup and it seems regardless of where I have the water level see on the tunze it will ultimately bubble up so much that the cup fills with water. Ive tried to tweek it raises it up and down on the water level mark...any pointers? Have you turned the blue knob to lessen the air flow? Link to comment
beyondcomp251 Posted January 30, 2011 Author Share Posted January 30, 2011 Im tweaking the air intake it seems to do the trick Link to comment
bioload Posted January 30, 2011 Share Posted January 30, 2011 Im tweaking the air intake it seems to do the trick Maybe needs to break in a little more? I like the water level about a half inch below the water level line.Then you can add more air to the mix and get a good thick skimmate. Its a good skimmer so should work for you. Link to comment
inTank Posted January 30, 2011 Share Posted January 30, 2011 ^ that Small changes and let it sit to adjust. Any skimmer takes up to two weeks to break in Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.