Mods to Nano-Cube overflow

[bobbyb323]

I set up my Nano-Cube tonight. I put 10 lbs. of live sand, 12lb. of seeded live rock from my reef tank and several corals. I should be fine with the live sand and existing rock. I made a modifacation to the inlet. I cut three 1/4" slot from the top of the filter wall to the top grate. I then raised the sponger in the second chamber and added a little extra water. It skims the water off the surface great! I am using the two sponges in the first chamber. The carbon with a sponge on top in the second. The ceramic rings in the third. On my cube the filter wall was not glued to the bottom so water can seep under it. Anyone else notice this? It's not a big deal, I don't have to worry about the sump going dry.