icecool2 Posted February 12, 2010 Share Posted February 12, 2010 I can't seem to figure out what the problem is with the bubble baffle in my sump. It stops pretty much all of the bubbles from coming through, but creates bubbles when the water falls into the return section. I was thinking of drilling some holes to allow it to flow easier, but I'd rather not just try things and have to rip it apart later. ideas? Link to comment
evilc66 Posted February 12, 2010 Share Posted February 12, 2010 If you have your ATO float in that return area, raise it so the water level isn't as low. Link to comment
icecool2 Posted February 12, 2010 Author Share Posted February 12, 2010 I don't have an ATO in there yet. That's the next step. How high do people usually keep the level in there? This is only like a 1-2" drop. Link to comment
evilc66 Posted February 12, 2010 Share Posted February 12, 2010 Higher the drop, the more bubbles you get. I keep mine to about 1/2", and even then I get some larger bubbles forming from the drop, but they never get sucked into the pump. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.