Jump to content
SaltCritters.com

Another obsessed Mini-Bow nut !!!!!


MattGecko

Recommended Posts

Tank Update:

 

Little tank is 10 month old.

 

292457_8527680693002591751_vl.jpg

 

 

 

================================

Started on June 16, 2002 (Replaced 90% LR, May 2 2003)

 

List below has been updated but picture has not. 6/10/03

 

Inhabitants

-----------------

Live Sand & Rock (From an established tank)

5 Hermit - Blue Leg

1 Hermit - Scarlet Reef

Cerith, Strombus & ?? Snails

Fire Shrimp

Emerald Crab................... "Gimp" (Missing 1 leg)

Ocellaris Clown................ "Squiggles"

 

 

Hard Corals

----------------

Montipora Capricornis (Red Cap)

Montipora Digitata

Pocillopora damnicornis

Candy Cane (Caulastrea)

 

Soft Corals

----------------

Kenya Tree (Capnella sp.)

Green Tree (Nephthea sp.)

Toadstool (Sarcophyton sp.)

Leather, Finger (Lobophytum sp.)

zoanthid's, Assorted

Mushroom's, Assorted

Ricordia, Assorted

GSP, Assorted

Polyps, Assorted

Xenia, Pom-Pom

Gorgonian, Encrusting

 

Misc.

-----------------

Halimeda, Coin

==============================================

Resize1.jpg

System Specs

7 Gallon Mini-Bow (AGA)

DIY Canopy & Base

Dual 32 Watt PC Retro kit w/fan

AquaClear 300 "Fuge" w/AQ150 impeller

(W/13W PC, Lowe's clip light)

DIY Surface Skimmer box

Eheim Heater

Iv Drip/ topoff

===========================

 

 

 

Our babies (7 & 72 Bow Front's):

 

080601SM.JPG

Link to comment

I mainly used oak & scraps of wood I had laying around. The wood on the base only covers the front. It's attached to the plastic base with screws.

Link to comment
  • 2 weeks later...

Stephen,

I had a some hard plastic tubing left over from my Ehiem pro II filter (for my FW tank).

 

I use the return piping, suction cups & end cap from the pro II filter. Cut it, drilled holes in it & used soft plastic tubing as a spacer on the power head. There's no dead spots in the tank & it can never fall as the power head is half way berried in the sand.

 

The intake for the AquaClear worked out good also. I bought the real AquaClear skimmer attachment but it was to large. I made one using the u-bend pipe. On low it sucks below the surface. When its on hi it skims the surface & blows small bubbles in.

Link to comment

Nice looking tank!

 

I was just wondering what kinda magnet you have off to the right. I like how it's very thin and doesn't take up too much room. Also wondering where you got it at and how much.

 

Thanks

Link to comment

Great Looking tank! :)

 

Is that bubble algae in there though?? I would remove that before it takes over the tank. The easiest way to rid your tank of that stuff is pull it out with tweezers but be careful not to break them. My tank got bubble algae at first but now its gone because I removed it carefully. My next problem is aptista amenomes comming up I have 3 of them so far but they are going to be elminated soon also because im gonna get a peppermint shirmp and I hear they eat them.

Link to comment

Yes, I have all three types of bubble algae. Ill have to star plucking it out.

 

I also had the aptista's but used a syringe with an extra strong dose of kalk. It worked great!!!!

Link to comment

The LPS said they were reef safe. It never bothered anything in the tank. Poor little guy got himself stuck in the filter intake & died over the weekend. :(

Link to comment
  • 1 month later...
  • 3 weeks later...

Archived

This topic is now archived and is closed to further replies.

  • Recommended Discussions

×
×
  • Create New...