Perm Posted August 25, 2009 Share Posted August 25, 2009 So I added a calcium reactor with a ph controller. I am stilll not quite sure what happened but the calcium is at 500 and the alk is at 17. The salifert kit only goes to 16 but I added another ml until it reacted. What do I need to do? Of course the reactor is off, but what should I do to bring it down safely? Everything in the tank still looks happy. Link to comment
Weetabix7 Posted August 25, 2009 Share Posted August 25, 2009 As long as everything is still looking happy, I'd let it come down on it's own. I'd also run the test again to make sure you get the same result, and check the expiration date on the test kit. Link to comment
darcurr Posted August 28, 2009 Share Posted August 28, 2009 As long as everything is still looking happy, I'd let it come down on it's own. I'd also run the test again to make sure you get the same result, and check the expiration date on the test kit. +1 Link to comment
Perm Posted August 31, 2009 Author Share Posted August 31, 2009 Thanks, it took a couple of days to work itself out and everything looked fine the whole time. I dont know where to find the exp date, but all my readings were very consistent. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.