nano2u Posted July 22, 2009 Share Posted July 22, 2009 Anybody else use Rowa-Phos in a reactor? If so, should I lose the bag? Or run the bag in the reactor? I'm still setting up and was wondering what others did before settling? Thanks Link to comment
Saiyan Posted July 24, 2009 Share Posted July 24, 2009 I do. You will want to lose the bag. Then make sure to start the reactor slowly or you will make the tank water rusty for awhile. Not a problem but it is ugly. Works great. You will see the algae disappear over a few days, as soon as is starts to come back then it is time to replace the media. Link to comment
lajz9 Posted July 24, 2009 Share Posted July 24, 2009 I used it for a while, replaced it with chemi-pure...did the job though. Link to comment
Phixion Posted July 26, 2009 Share Posted July 26, 2009 Rinse it off well as the directions say, then dump in your reactor and you should be good to go! Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.