Coryd55 Posted February 8, 2009 Share Posted February 8, 2009 My ACR is not putting out much flow. It is just dripping out. I'm not sure what the problem is. It has a MJ1200 running on it, is there a stronger pump I can put on it? Thanks Link to comment
BKtomodachi Posted February 8, 2009 Share Posted February 8, 2009 Uh, something has gone terribly wrong with either the pump or the injection system probably. Take the pump off, see if it is functioning properly. If it is, take the skimmer off and find the problem- probably a clog somewhere. Link to comment
disaster999 Posted February 9, 2009 Share Posted February 9, 2009 might want to clean the injectors too. check the flow on the pump. Link to comment
CoolNameGoesHere Posted February 9, 2009 Share Posted February 9, 2009 +1 on checking for clogs in the injector. unscrew the plastic screw above the injector nozzle inside the unit and if you have a small brush or something, scrub around in there to knock the gunk loose and out. shine a flashlight in there first so you can do a before/after appraisal. i had a similar experience and getting the gunk out of the injector nozzle fixed it completely. Link to comment
Coryd55 Posted February 10, 2009 Author Share Posted February 10, 2009 Thanks I will try that and see if it works. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.