ZachReefs Posted January 28, 2009 Share Posted January 28, 2009 I have had my 20L set up for a while now, and had a Koralia 2 in one corner. It runs flawlessly, but I decided that I wasnt getting quite enough flow between it and a skimmer. I added a second Koralia 2, but am thinking I have too much flow now. I think I needed a nano, or a 1. Anyone else using these powerheads? What size PH, and in what tank? Link to comment
Rocket Posted January 28, 2009 Share Posted January 28, 2009 When I had my AP 24 setup I ran a K2 in the back right corner blowing forward toward the front bow glass. I eventually tried a k3 with the k2 and the k3 alone and I had a sand storm. Now you have a 20 LONG, so you probably need another k2, or k1 on the other side. Link to comment
chironerd21 Posted January 28, 2009 Share Posted January 28, 2009 Currently I am using 2 nanos from each side.... and then i have a return pipe from the refugium...and using a Tunze Nano.... Link to comment
ZachReefs Posted January 28, 2009 Author Share Posted January 28, 2009 I currently have 2 K2s, one in each upper corner, right and left. I also have the protein skimmer outlet. Perhaps I need to just play with the positioning of the outlet flow. Link to comment
cuboy Posted January 28, 2009 Share Posted January 28, 2009 I have 2 K1, and I do not feel that it's enough flow. However, I haven't added my protein skimmer or my hob filter Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.