syntax_error Posted October 21, 2008 Share Posted October 21, 2008 I'm having a hard time trying to figure out how to set up the cooling fan for my BioCube 29. I've been running it using a timer, allowing it to switch on at the evening when the tank usually shows the highest temperatures, but this method isn't really effective. So I'm looking for a product like this . I was wondering whether there is a cheaper alternative or a similar product for this purpose. Anyone know? Link to comment
Matty1124 Posted October 21, 2008 Share Posted October 21, 2008 you should be running your fan when your lights are on... thats when its going to have the highest temps... Link to comment
sidviciousw Posted October 21, 2008 Share Posted October 21, 2008 I agree, run the fan as long as the light is on, it is easier to keep it from getting hot than to cool it back down Link to comment
syntax_error Posted October 21, 2008 Author Share Posted October 21, 2008 No, that doesn't work. The fan is actually too good for the job. It would cool down the tank too much if I kept the fan on long enough. Sorry, should have mentioned that earlier. Any ideas? Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.