Whisk Posted October 15, 2008 Share Posted October 15, 2008 Hi all, anyone know what Y splitter loc line size i would need to get for the aquapod 24? anyone have a link on a good price of one? I know its either a 1/2'' or 3/4''. thanks a bunch! Link to comment
Whisk Posted October 15, 2008 Author Share Posted October 15, 2008 I found the parts, now i just need to know whether it's 1/2'' or 3/4'' inch that will fit. http://www.drsfostersmith.com/product/prod...cfm?pcatid=4090 Link to comment
dflash Posted October 15, 2008 Share Posted October 15, 2008 If you still have your stock pump, make sure it can produce enough flow after the lockline y-splitter. You will have a significant water preasure loss and the flow will suffer. Link to comment
Whisk Posted October 15, 2008 Author Share Posted October 15, 2008 thanks for the heads up. I have considered that and will be replacing the stock with a MJ-1200. Link to comment
babyjess210 Posted October 16, 2008 Share Posted October 16, 2008 http://www.aquariumpart.com/Y_Return_Nozzl..._p/rcu07121.htm The link is way cheaper and fits better. I use the Aquapod 12 fittings to a 1/2" locline and it was a tight fit. Link to comment
Whisk Posted October 16, 2008 Author Share Posted October 16, 2008 http://www.aquariumpart.com/Y_Return_Nozzl..._p/rcu07121.htm The link is way cheaper and fits better. I use the Aquapod 12 fittings to a 1/2" locline and it was a tight fit. THANK YOU very much babyjess. I've been looking all over for this thing, and wow, what a great price too. Finally something that says its for the AP 24. High-five THANKS AGAIN, you nailed it Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.