jetfixr Posted August 18, 2008 Share Posted August 18, 2008 Before I pull the trigger and buy the tunze, would like to know if it will fit in my NC-24? I have a Sunpod so I am not running the stock hood, so height should not be an issue. It looks like the square portion will fit in the center compartment just fine, but the cup is much larger, and I am not sure if it will fit between the false wall and the back of the tank. Link to comment
StevieT Posted August 18, 2008 Share Posted August 18, 2008 If the skimmer does fit but the cup is an issue, I can make you one that will fit. http://www.nano-reef.com/forums/index.php?...p;#entry1689249 There are a lot of tanks where that round cup does not work well in. As long as the body fits, we can work around the cup problem! Link to comment
jetfixr Posted August 19, 2008 Author Share Posted August 19, 2008 Very nice craftsmanship!!! At this point I am not sure if the cup will fit though. Since I have no top, I really don't have any issue with the height, and I don't have an issue hacking out a bit of the false wall, as long as the surface skimmer on the false wall is still functional. Link to comment
colinadam Posted August 19, 2008 Share Posted August 19, 2008 The new version of this skimmer come with magnets that are built into the side, not the hanging bracket. You need the chamber to be 5" wide and 3" deep for it to fit. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.