InTr4nceWeTrust Posted July 3, 2008 Share Posted July 3, 2008 My GFCI tripped for some reason so I reset it and everything went back on. Or so I thought. The mag5 jammed and so there was zero water flow through my chiller (Prime 1/10HP). I only realized it several hours later. Is it likely the chiller is damaged? It's only been a short while since I turned it back on so I don't know if it's working yet. I'm worried, though : / Link to comment
jeremai Posted July 3, 2008 Share Posted July 3, 2008 My Prime 1/10hp has an automatic cut-off if there's not enough water flowing through. It should be fine. Is the chiller reading the temperature you want it to? Can you double-check with another thermometer? Link to comment
InTr4nceWeTrust Posted July 3, 2008 Author Share Posted July 3, 2008 Oh is there? I was hoping there was but couldn't find that anywhere in the manual. The chiller is reading the temp to the temp I set it to. Well it's almost there. It's down to 80 from 84. Set to 79. Lights have turned off already so I can't really see the mercury thermometer. I guess the chiller is all right. Thanks for the assurance, jeremai ^_^ Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.