Spencerx Posted August 1, 2003 Share Posted August 1, 2003 for my new 20gL that i am setting up I plan on incorporating a SCWD on the return. To take advantage of the 'wave action' i was thinking of drilling a bulkhead in each end of the tank so that the water will be more of a back/forth motion. understand kinda? do you think this would be cool or not worth it? if i dont do this i will just drill the bottom in the overflow with the return coming up and loc-line to position it. Any comments?? Link to comment
OxInYourBox Posted August 1, 2003 Share Posted August 1, 2003 The bulkheads at either side of the tank sound good. What size pump were you thinking of going with? I still have my SCWD closed loop setup that I built but never put in (with the ball valves I made it too wide for my 10G DOH). LMK if you're interested in it. Link to comment
Spencerx Posted August 1, 2003 Author Share Posted August 1, 2003 mag 9.5 is what i read is good (MacNreef using one on his 20), yeah ill talk to you about your scwd..... Link to comment
kribbz Posted August 1, 2003 Share Posted August 1, 2003 i'm using a scwd on my 10 gallon with a simalar setup. i only have a mag 2.5 on the return. the tank is still cycling but sofar happy with the results Link to comment
OxInYourBox Posted August 1, 2003 Share Posted August 1, 2003 Hey Spencer-You signed off too quickly before I could reply back. We can work out the scwd etc. I doubt I'll use the setup so we'll chat about it. L8r. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.