doe Posted June 13, 2007 Share Posted June 13, 2007 New never used Seio Electronic controller. Bought this about a week ago but decided to go in a different direction Features: Built-in Auto High-Low Speed Variable timit 15 sec. to 30 min. Runs One or Two Seio Pumps Auto Restart After Feeding Intended for use with only SEIO water pump models: 1100, 1500, & 2600 The controller will control one or two SEIO Super Flow Water Pumps. The pumps can be set to go from low to high; this surge can be set from 15 seconds to 30 minutes. The pumps on low operate at approximately 50% flow and then will ramp up to 100% when on high. There are also two preset feeding buttons at 8 minutes and 16 minutes. Once the time has elapsed the unit will go back to the original preset. Note: Replaceable fuse 2.5 amp/250v $140 Shipped Hobby Experience: Not Enough Link to comment
Izzue Posted June 15, 2007 Share Posted June 15, 2007 Nice deal... DAngit...I just traded coral for one at LFS or I would have jumped on it. Good luck with sale...Just keep in Mind you may be better off at RC... Those controllers only run the M1100 and up -most nanos cant handle that Izzue Link to comment
shag26272 Posted June 15, 2007 Share Posted June 15, 2007 You can use the Koralias on the Seio controller also. Link to comment
doe Posted June 15, 2007 Author Share Posted June 15, 2007 You can use the Koralias on the Seio controller also. I have read that others have used the koralias on the seio controllers but i have not done so myself Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.