andrewkw Posted March 9, 2007 Share Posted March 9, 2007 I'm starting my first frag tank, a 15g that was formerly my nano reef. I have tried gluing egg crate with super glue but that failed and I had a hell of a time getting it off my hands. I then tried aquarium silicon and left it to cure for a day, again failed. I've since just put the egg crate in the tank however its not overly sturdy. Should I just leave it as is or is there a better attachment method i'm unaware of. thanks Link to comment
proraptor2 Posted March 9, 2007 Share Posted March 9, 2007 ziptie it together or use super glue gel....Ive used both and they work Link to comment
sephroth_r1 Posted March 9, 2007 Share Posted March 9, 2007 what he said, i used super glue, and the extra tabs, worked good for me. Link to comment
Kool-cat Posted March 9, 2007 Share Posted March 9, 2007 I use crazy glue. I had to hold it in place for like 2 minutes and the glue was a little runny, depending on how much I put. Link to comment
andrewkw Posted March 9, 2007 Author Share Posted March 9, 2007 ziptie it together or use super glue gel....Ive used both and they work don't zipties have metal in them? Link to comment
nanoty Posted March 9, 2007 Share Posted March 9, 2007 don't zipties have metal in them? Your thinking twist-ties. Link to comment
andrewkw Posted March 9, 2007 Author Share Posted March 9, 2007 I'm going to try fishing line later if that doesn't work I'll pick up some zip-ties on the weekend. thanks for the tips! Link to comment
The Propagator Posted March 9, 2007 Share Posted March 9, 2007 Some zip ties DO have a metal pin inside the part the ribbon slides through that locks it in. Weld-on #12 works AWSOME on eggcrate and PVC. So does Oateys PVC compound. You can also make your own Acrylic cement with paint thinner and acrylic chips. Link to comment
andrewkw Posted March 9, 2007 Author Share Posted March 9, 2007 thanks for all the tips. I'll figure something out. I guess this wasn't the 1hr job I thought it would be Link to comment
Daemonfly Posted March 9, 2007 Share Posted March 9, 2007 I use superglue. Strong enough to hold good, but if you really need to break it apart, it comes apart relatively easy enough. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.