VstyLe09 Posted April 13, 2016 Share Posted April 13, 2016 New lurker here. Finally getting into saltwater aquariums so I'm still learning. My plans are 2 fishes and some mix sps/lps corals. I went with a Nuvo 10 tank on a biocube stand Equipment: - Kessil a160w w/ goose mount - ecotech mp10wes - spin stream nozzle - inTank media basket ( planning on running filter floss, chemipure blue, phosphate) - mj900 return pump - 50w cobalt Neotherm heater just waiting on my dry rocks to come from reefcleaners so I can start Aquascaping Went for the Red Sea coral pro salt for my mixing and caribsea Arag-live sand Will post pics as I start getting it set up Link to comment
reefernanoman Posted April 14, 2016 Share Posted April 14, 2016 New lurker here. Finally getting into saltwater aquariums so I'm still learning. My plans are 2 fishes and some mix sps/lps corals. I went with a Nuvo 10 tank on a biocube stand Equipment: - Kessil a160w w/ goose mount - ecotech mp10wes - spin stream nozzle - inTank media basket ( planning on running filter floss, chemipure blue, phosphate) - stock pump - 50w cobalt Neotherm heater just waiting on my dry rocks to come from reefcleaners so I can start Aquascaping Went for the Red Sea coral pro salt for my mixing and caribsea Arag-live sand Will post pics as I start getting it set up Good luck and welcome to the club! Check out my fusion 10G thread. Link to comment
VstyLe09 Posted April 16, 2016 Author Share Posted April 16, 2016 Aquascaped today, just gotta epoxy it together and should be able to start the cycling process Link to comment
VstyLe09 Posted April 17, 2016 Author Share Posted April 17, 2016 Got the rocks epoxied and equipment set up. Forgot to stop by the fish store to get some rodi water to mix so that'll have to wait til tomorrow to start the cycle Link to comment
dferrari13 Posted April 17, 2016 Share Posted April 17, 2016 That rock work is awesome...it's gunna look great filled in with coral Link to comment
VstyLe09 Posted April 18, 2016 Author Share Posted April 18, 2016 Thanks dferr. Was able to add water in... I realized that the tank didn't take exactly 10g and I put enough salt to mix for that amount. Only 7-8gallons total. Going to have to take some out and put rodi water. Link to comment
azn-allstar Posted April 19, 2016 Share Posted April 19, 2016 Tank looks great. Anyways, how do you like the spin stream so far? I'm planing on getting it for my Nuvo. Link to comment
VstyLe09 Posted April 20, 2016 Author Share Posted April 20, 2016 My spin stream is broken so I can't really give any review on it. Just using the stock nozzle for now with the vortech Link to comment
VstyLe09 Posted April 20, 2016 Author Share Posted April 20, 2016 Well it's been 2 days since the cycle. Was able to get a small live rock from a friend to try and seed the other rocks and used a small bottle of bio spira. Should I be expecting the results below? Was thinking about getting a small damsel in there. Any feedback is appreciated Link to comment
landon1010 Posted April 25, 2016 Share Posted April 25, 2016 Have you seen a nitrite spike? You could try raising your ammonia to see how well your tank can break it down and check to see how quickly it is broken down. Link to comment
VstyLe09 Posted April 25, 2016 Author Share Posted April 25, 2016 I went ahead and did a fishless cycling and dosed 10% pure ammonia until I got it to 5 ppm After 6 hrs ammonia was more then 8 ppm 24 hrs later ammonia is 0 and nitrite was 5ppm+ and nitrates was around 20-40ppm I added another dose to being ammonia back up to about 3 ppm Will run another test when I get off work Link to comment
landon1010 Posted April 25, 2016 Share Posted April 25, 2016 Sounds like its handling the ammonia very well. Sounds cycled to me. I did the same fish less cycle method minus the bio spira and when it was able to break down the ammonia and my nitrites were in check as well I did a water change to get nitrates under control and added 2 clowns, 3 hermits, and some snails. Link to comment
Cencalfishguy56 Posted April 25, 2016 Share Posted April 25, 2016 I went ahead and did a fishlike as cycling and dosed 10% pure ammonia until I got it to 5 ppm After 6 hrs ammonia was more then 8 ppm 24 hrs later ammonia is 0 and nitrite was 5ppm+ and nitrates was around 20-40ppm I added another dose to being ammonia back up to about 3 pond. Will run anothe test when I get off work it will likely be fast, I cycled my tank in a week doing this method Link to comment
BeeZieReef Posted April 25, 2016 Share Posted April 25, 2016 I have my Nuvo on my old biocube stand as well! Except mine has glass on the door (might be an older version) Your tank is cycling pretty quickly. Mine took over a month to cycle, using dry rock, a small piece of raw shrimp, ghost feedings, and dosed Fastart M/Microbacter7. I thought I was going to have a quick cycle since my ammonia spiked and dropped to 0 within 2 weeks, but the nitrite took forever to drop. I was so tempted to add something to the tank but remained patient. Patience is def one thing i learned from this hobby Link to comment
VstyLe09 Posted April 25, 2016 Author Share Posted April 25, 2016 Alright so was able to run another test Ammonia - 0 Nitrite 2-5ppm Nitrate -~10ppm No diatoms bloom or algae yet either besides the algae that came on the live rock I should be waiting for nitrite to go down to 0 and then do a ~75% water change before adding any live stock? Or wait for that algae bloom and get a CuC in there. If it helps I did raise the temp to 83 degree. FTS Link to comment
Cencalfishguy56 Posted April 25, 2016 Share Posted April 25, 2016 Alright so was able to run another test Ammonia - 0 Nitrite 2-5ppm Nitrate -~10ppm No diatoms bloom or algae yet either besides the algae that came on the live rock I should be waiting for nitrite to go down to 0 and then do a ~75% water change before adding any live stock? Or wait for that algae bloom and get a CuC in there. If it helps I did raise the temp to 83 degree. FTS drop your temp to 78-80 and don't add livestock till you zero out on nitrite and ammonia, then do a water change to get your nitrates down at which point you can begin to add livestock, I also never saw a diatom bloom till probably a week after maybe a little before the week but after my cycle for sureNow I'm in the green algae that covers your rocks but not nuisance algae Link to comment
VstyLe09 Posted April 26, 2016 Author Share Posted April 26, 2016 Did another test before going to work Ammonia - 0 ppm Nitrite - 0 ppm Nitrate - 0 ppm Looks like the cycle is done but I put a little ammonia to see if nitrite and ammonia would be 0 after I get off work. Only thing that bothers me is nitrate is at 0 now. I don't have any filtration besides filter floss. Is there something wrong? Link to comment
Cencalfishguy56 Posted April 26, 2016 Share Posted April 26, 2016 Did another test before going to work Ammonia - 0 ppm Nitrite - 0 ppm Nitrate - 0 ppm Looks like the cycle is done but I put a little ammonia to see if nitrite and ammonia would be 0 after I get off work. Only thing that bothers me is nitrate is at 0 now. I don't have any filtration besides filter floss. Is there something wrong? you should have some nitrates, I suspect your tests might be bad? Try running another test Link to comment
VstyLe09 Posted April 26, 2016 Author Share Posted April 26, 2016 Definitely going to do that later. I was expecting at least 40+ ppm Link to comment
Cencalfishguy56 Posted April 26, 2016 Share Posted April 26, 2016 Definitely going to do that later. I was expecting at least 40+ ppmyea after my cycle I think I was around 40-50ppm after 2ppm ammonia dosed at the beginning of the cycle Link to comment
landon1010 Posted April 26, 2016 Share Posted April 26, 2016 Take you bottle 2 of nitrate and tap it firmly on a solid surface a few times. Then shake for a few minutes and re test. The bottle seem pretty durable so the harder the tap, the better your chances of mixing up anything that has settled will be. Link to comment
VstyLe09 Posted April 26, 2016 Author Share Posted April 26, 2016 Tapping and shaking the bottle did do it. Nitrates ~20ppm Nitrites - 5ppm Ammonia - 0ppm Guess ill start getting my water change things ready Link to comment
landon1010 Posted April 26, 2016 Share Posted April 26, 2016 Same thing happened to me with my api test kit. Sounds like your almost ready to go! Link to comment
VstyLe09 Posted April 28, 2016 Author Share Posted April 28, 2016 Did a ~70% water change yesterday and stopped by a LFS to pick up a six line wrasse and 2 corals (if anyone can help me identify the zoa/paly and the other piece that would be great) Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.