adinsxq Posted March 15, 2003 Share Posted March 15, 2003 these bulbs are from a dual 13w bayco "work lamp" that i hacked up. the bulbs are new as you can see by their clean white tubes and i did test them in the worklamp. lizbeth did some tests to see if this particular ballast can cross run different "brand" bulbs and i forget what the conclusion was... so i'd only suggest you use these in bayco setups (worklamps, bookworms, etc). i'm thinking $15 (paypal) shipped USPS, but go ahead and make your offers. thanks. Link to comment
adinsxq Posted March 15, 2003 Author Share Posted March 15, 2003 packed, ready to go: Link to comment
SaltyDawg Posted March 16, 2003 Share Posted March 16, 2003 With the one bulb fixture made by bayco you can run the 13w 50/50's but not with the two bulb bayco fixtures. Prety much anything over .250 amphere cant be ran in the two bulb fixture. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.