tennis20 Posted April 3, 2012 Share Posted April 3, 2012 I have a 6 gallon jbj nanocube and i think i have too much current. One of my xenias isn't opening up. There aren't any low current spots. I tried putting filter floss in the outtake nozel(the filter pump acts as a powerhead). Also linear. Has anyone experienced this with the jbj nano cube? ANd is this too much current. Link to comment
Islandoftiki Posted April 3, 2012 Share Posted April 3, 2012 Xenias usually don't mind a lot of flow. Mine gets pretty heavy flow from the powerhead, It looks like it's getting blown around pretty hard, but it keeps growing like crazy. I have to frag it almost every month to keep the size down. Link to comment
tennis20 Posted April 3, 2012 Author Share Posted April 3, 2012 Can i tone it down if i want Link to comment
atoll Posted April 4, 2012 Share Posted April 4, 2012 Not familiar with this tank but if you want to turn the pump down but can't then can you not put something in front of the outlet like a rock and fragment the flow from it. By dispersing the water flow it should calm the flow down somewhat. Link to comment
HecticDialectics Posted April 4, 2012 Share Posted April 4, 2012 If it's just the stock JBJ nanocube, I really doubt that the flow is too high for the xenia. It might just be your general water parameters ticking it off. Link to comment
PwnMe Posted April 4, 2012 Share Posted April 4, 2012 Mine is blown by a Koralia 240 in an 8 gallon. At all times. Not only does it pulse... it multiplies. I'd be more concerned about water parameters. The Xenia deal with my ever changing flow conditions without ever closing. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.