jeffmr4 Posted June 28, 2016 Share Posted June 28, 2016 Does anyone know if you cut a piece of intank's filter floss a little bigger than the size of the second chamber and put it in if it will work without using a media basket? Link to comment
Idaho ken Posted June 28, 2016 Share Posted June 28, 2016 Would you try to run it vertically or horizontal? It would eventually sink to the floor, unless your using some kind of basket, Like the original top filter piece? Or are you thinking of sticking a large bulk piece in the chamber? Link to comment
jeffmr4 Posted June 28, 2016 Author Share Posted June 28, 2016 Horizontally. I thought if I cut a piece slightly bigger than the opening that it pressing against the walls might keep it there. I'm not sure if the water would push it down. Optionally, I have a heater in that chamber that is near the surface. I could put it on top of that and that might keep if from moving down. I don't know how thick the sheets are from intank but those are the ones I ordered. Link to comment
Reef Hollister Posted June 28, 2016 Share Posted June 28, 2016 I can't envision a feasible way to make it work without a basket. Sorry. Link to comment
Harrisonbored Posted June 28, 2016 Share Posted June 28, 2016 You could have a piece of egg crate wedged on top of your heater and then floss on top of that... or you could just use egg crate to customize a basket that'll house your heater and/or work with what your trying to do in chamber 2 Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.